Device In The Flex Bay - Lenovo ThinkStation P620 User Manual

6. Reconnect the power cord and all disconnected cables to the computer.
Note: If a locking device is available, use it to lock the computer.

Device in the flex bay

Prerequisite
Before you start, read Appendix B "Important safety information" on page 83 and print the following
instructions.
The flex bay of your computer supports the following devices:
• Flex module
• Front-access storage enclosure
• Multi-drive conversion kit
• Slim-optical-drive adapter
Note: The following instructions on how to remove or install a slim-optical-drive adapter also apply to other
supported devices in the flex bay.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 26.
2. Locate the flex bay. See "Internal storage drives" on page 7.
3. Disconnect the signal cable and the power cable from the rear of the slim optical drive.
Note: If you are removing other supported devices from the flex bay, disconnect any additional cables
first.
30
P620 User Guide