ESAB 0700300989 Instruction Manual page 10

3 TECHNICAL DATA
Wire feed speed
Wire diameter
Mild steel solid wire
Stainless steel solid wire
Flux cored wire
Aluminium
Bobbin size
Dimensions l×w×h
Weight
Operating temperature
Enclosure class
Application classification
Duty cycle
The duty cycle refers to the time as a percentage of a ten-minute period that you can weld or
cut at a certain load without overloading. The duty cycle is valid for 40 °C (104 °F).
For more information see section "Duty cycle" in the OPERATION chapter.
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP 23S is intended for indoor and outdoor use; however, should not be
operated in precipitation.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
0463 486 001
2.0–17.8 m/min
(80–700 in./min)
0.6–1.0 mm (0.023–0.040 in.) 0.6–1.0 mm (0.023–0.040 in.)
0.8–1.0 mm (0.030–0.040 in.) 0.9–1.0 mm (0.035–0.040 in.)
0.8–1.1 mm (0.030–0.045 in.) 0.8–1.1 mm (0.030–0.045 in.)
0.8–1.2 mm (0.030–3/64 in.)
Ø 100–300 mm (4–12 in.)
686 × 292 × 495 mm
(27.0 × 11.5 × 19.5 in.)
28.6 kg (63 lb)
-10 to +40 °C (+14 to
+104 °F)
IP23S
- 10 -
EMP 235ic
2.0–17.8 m/min
(80–700 in./min)
0.8–1.2 mm (0.030–3/64 in.)
Ø 100–300 mm (4–12 in.)
686 × 292 × 495 mm
(27.0 × 11.5 × 19.5 in.)
28.6 kg (63 lb)
-10 to +40 °C (+14 to
+104 °F)
IP23S
© ESAB AB 2021