Yamaha YFM700PF Owner's Manual page 39

handle differently. This could distract the oper-
ator and increase the risk of losing control and
of causing an accident.
This ATV is equipped with a switch to change from
two-wheel drive to four-wheel drive and vice ver-
sa. Select the appropriate drive according to the
terrain and the conditions.
 "2WD" (two-wheel drive): Power is supplied to
the rear wheels.
 "4WD" (four-wheel drive): Power is supplied to
the rear and front wheels.
To change from two-wheel drive to four-wheel
drive, stop the ATV and push the switch in to the
"4WD" position. Then, the four-wheel-drive
indicator " " comes on in the multi-function dis-
play.
To change from four-wheel drive to two-wheel
drive, stop the ATV and push the switch in to the
"2WD" position.
1. On-Command four-wheel-drive switch "2WD"/"4WD"
EBU30462
On-Command differential gear lock switch
"4WD"/"LOCK"
EWB00132
WARNING
Always stop the ATV before changing from
four-wheel drive to four-wheel-drive differen-
tial gear lock or vice versa.
The ATV handles differently in four-wheel drive
than in differential gear lock in some circum-
stances. Changing from four-wheel drive to
differential gear lock or vice versa while mov-
ing may cause the ATV to handle differently un-
4-10
1
2WD
4WD
4