Yamaha YFM700PF Owner's Manual page 149

To install the battery
TIP
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt. NOTICE: When installing the bat-
tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Install the battery holding plate by installing
the nuts.
[ECB01111]
1
2
4. Install the front carrier by installing the bolts
and tightening them to the specified torques.
Tightening torques:
Carrier bolt (upper):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (lower):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
5. Install the panel.
8-58
8