Yamaha YFM700PF Owner's Manual page 104

2. Install the front carrier by installing the bolts
and tightening them to the specified torques.
Tightening torques:
8
Carrier bolt (upper):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (lower):
34 Nm (3.4 m·kgf, 25 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
3. Install panel A.
Panel C
To remove the panel
1. Remove the seat. (See page 4-18.)
2. Remove the quick fastener screws, and then
pull the panel upward to remove it.
1. Panel C
2. Quick fastener screw
To install the panel
1. Place the panel in the original position, and
then install the quick fastener screws.
8-13