Table of Contents
Advertisement
Replacing the power-adapter
port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Insert the power-adapter port into the slot on the palm-rest assembly.
2
Align the screw hole on the power-adapter port with the screw hole on the
palm-rest assembly.
3
Replace the screw (M2x3) that secures the power-adapter port to the palm-rest
assembly.
4
Connect the power-adapter port cable to the system board.
Post-requisites
Replace the
base
52
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
Advertisement
Table of Contents
