Replacing The Display Assembly; Procedure; Post-Requisites - Dell Inspiron 15-7573 Service Manual

Replacing the display assembly

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1 Place the display assembly on the palm-rest assembly.
2 Align the screw holes on the display hinges with the screw holes on the palm-
rest assembly.
3 Replace the seven screws (M2.5x5) that secure the display assembly to the
palm-rest assembly.
4 Route the antenna cables through the routing guides on the palm-rest assembly.
5 Adhere the tape that secures the antenna cables to the keyboard shield.
6 Slide the display cable and the touch-screen board cable into their respective
connectors on the system board and close the latches to secure the cables.
7 Adhere the tapes that secure the display cable and the touch-screen board cable
to their respective connectors on the system board.
8 Close the display and turn the computer over.

Post-requisites

1 Replace the wireless
2 Replace the base
60
computer. After working inside your computer, follow
After working inside your
card.
cover.
computer. For more safety best
www.dell.com/
Before