Setting Up Screen Call - Sanyo SCP-2400 User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or one
that you record. You can also record the caller's message into the
Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On and press
3.
Set the answering time by using numeric keys or by
pressing the navigation key up or down.
4.
Press
the standby display.)
Tip:
If a new caller's message is waiting,
memos recorded while activating "Screen Call"are shown with a " "or
" "icon in the list (" ": played once; " ": not yet played). To listen to the
message, see "Reviewing Voice Memos"on page 131.
Tip:
While the caller's message is being recorded, press
call, or press
Section 2H: Using Your Phone's Voice Services
> Tools > Voice Services > Screen Call > Auto.
or OK (left softkey). (The
to stop recording and disconnect the call.
.
icon is displayed on
appears on the display. The
to answer the
133