Using Speed Dialing - Sanyo SCP-2400 User Manual

Using Speed Dialing

With this feature, you can dial your favorite entries using one
keypress for locations 2–9. (See "Assigning Speed Dial
Numbers"on page 109.)
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key
for approximately two seconds.
– or –
From standby mode, press the appropriate key and press
The display confirms that the number has been dialed when it
shows "Connecting...".
To use speed dial for Sprint PCS Ready Link calls:
From standby mode, press the appropriate key and
then press
Sprint PCS Ready Link Entries"on page 156.) The display
confirms that the number has been dialed when it
shows "R-Link calling..."
Note:
Speed dialing is not available when you are roaming; when you are
roaming off the Nationwide Sprint PCS Network, you must always dial using
11 digits (1 + area code + number).
40 Section 2A: Your Phone – The Basics
or .
. (See "Assigning Speed Dialing for