Setting Headset Mode - Sanyo SCP-2400 User Manual

Setting Headset Mode

This feature allows you hands-free phone use. Set the headset
mode to Voice Call or Ready Link call and press the Turbo
Button (the operation button) on the headset to activate
useful functions such as making calls, receiving calls, or
switching to the Voice Command feature.
To connect the headset:
Simply plug the headset into your phone's headset jack.
To set headset mode:
1.
Select
2.
Select an option and press
Tip:
For an explanation of the Headset Mode setting, press Info (right
softkey) during step 2 above.
Note:
When using the headset, DO NOT set the volume too high. Listening
at high volume for an extensive period of time may cause hearing loss.
76 Section 2B: Controlling Your Phone's Settings
> Settings > Others > Headset Mode.
Voice Calls: Press the Turbo Button to activate Voice
Dial. Press twice to redial the last call. Press and hold
to record a Voice Memo.
Ready Link: Press and hold the Turbo Button to redial
the last Sprint PCS Ready Link call.
Off: Select Off if you do not wish to assign a Turbo
Button setting or if your headset does not have a
Turbo Button.
: