Advertisement
WORK
Installing the front fender
3.4
Refitting the headlight mask with the headlight
3.5
Installing the shock absorber
3.6
–
Ensure that the spacers are mounted in the fender.
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws, chassis
Info
Make sure the holding lugs engage in the start number plate or headlight
mask.
600692-10
–
Connect the electric plug connector
600702-11
–
Position the headlight mask and fix it with the rubber band
Info
Ensure that the retaining lugs engage in the fender.
–
Position the brake line and wiring harness. Put the clamp on, mount and tighten
screw
.
–
Check the headlight adjustment.
600703-11
–
Push splash protector
tighten screw
Guideline
Screw, top shock absorber
–
Mount and tighten screw
Guideline
Screw, bottom shock
absorber
600668-11
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
–
Remove the motorcycle from the lift stand.
.
to the side and position the shock absorber. Mount and
.
M12
.
M12
.
M6
10 Nm (7.4 lbf ft)
.
80 Nm
Loctite
®
(59 lbf ft)
80 Nm
Loctite
®
(59 lbf ft)
8
2701
2701
Advertisement
