Table of Contents
Advertisement
HOW TO STOP THE PYROLYSIS CYCLE
I I
1.
Turn the function selector to 0 (oven OFF)
■ If the oven cavity temperature is higher than
300 °C
1a do•Lo (door locked) appears steadily on the
programmer display.
1b When the oven cavity temperature drops below
300°C:
•
the time appears on the programmer display
again;
•
the key pilot light goes out;
•
the door unlocks.
1a
■ If the oven cavity temperature is lower than 300 °C
1c The time appears on the programmer display.
1b
1d After a technical time:
•
the key pilot light goes out;
•
the door unlocks.
ACCIDENTAL
PYROLYSIS CYCLE
2.
The function selector has been turned to any
cooking function
■ If the oven cavity temperature is higher than
300 °C
2a do•Lo (door locked) appears steadily on the
programmer display.
2b When the oven cavity temperature drops below
300°C:
•
P0•00 appears with P flashing;
2a
•
the key pilot light goes out;
•
the door unlocks.
2b
2c To reset normal conditions turn the function selector to
0 (oven OFF). The time appears on the programmer
display.
■ If the oven cavity temperature is lower than 300 °C
2c/d
2d The time appears on the programmer display, or the
oven cavity temperature (caution: in this case the
heating elements are working).
2d
2e After a technical time:
•
the key pilot light goes out;
•
the door unlocks.
2f
To reset normal conditions turn the function selector to
0 (oven OFF). The time appears on the programmer
display.
INTERRUPTION
OF
THE
27
Advertisement
Table of Contents
