Table of Contents
Advertisement
SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS)
Way 2: SETTING THE COOKING TEMPERATURE WITH THE
PROGRAMMER
24
Function
selector knob
The temperature set is shown on the electronic
programmer display and can be varied, with 5 °C
intervals, by pressing the related keys of the programmer.
During the cooking the oven temperature is measured
by a sensor inside the cavity and is shown on the
programmer display.
1.
2.
2a If °C is not flashing press key 4 of the programmer.
4
5
6
2b Press key 6 to increase the temperature or key 5
2a
2b
3.
P
A
U
T
O
Digital electronic
programmer
SELECTING THE COOKING FUNCTION
Turn the selector knob to the cooking function
required.
The pre-set temperature appears on the programmer
display. °C flashes on the display for 3 seconds.
The heating elements start cooking immediately.
SETTING THE COOKING TEMPERATURE
The temperature can be changed when °C is
flashing on the display
to reduce it.
The maximum temperature which can be set is 250
°C while the minimum temperature is 50 °C.
Note: When °C becomes steady the value shown on
the display indicates the oven cavity temperature.
Caution: If a temperature below the minimum value
(50 °C) is set the system switches off automatically
and OFF appears. In this case repeat the procedure
from point 2.
SWITCHING OFF
Turn the selector knob to position 0 (oven OFF).
The programmer display shows the time.
Figure 15
Advertisement
Table of Contents
