DeLonghi DE607PSCP Installation And Service Instructions Manual page 27

Pyrolytic built-in oven
Table of Contents

Advertisement

PROGRAMMER
MESSAGE
I I I I
I I I I I I
I I I I
I I I I I I
MESSAGE MEANING
After the Pyrolysis cycle
P
and
flashing.
The door is unlocked and can be
opened.
During the Pyrolysis cycle
P
and
flashing.
The door has been opened and
closed again.
The Pyrolysis cycle is cancelled.
During the Pyrolysis cycle.
There has been a power cut.
During the Pyrolysis cycle.
The
oven
function
knob has been moved from the
Pyrolysis function to a cooking
function.
The oven cavity temperature is
higher than 300°C.
During the Pyrolysis cycle.
The oven function selector knob
0
has been moved to
the Pyrolysis cycle.
The oven cavity temperature is
higher than 300°C.
During a cooking function.
Oven operation fault.
door flashing and cooking symbol
on.
Waste of energy symbol. The
oven door is open while cooking
is taking place.
door flashing, cooking symbol on
and audible signal.
Waste of energy symbol. The oven
door has been open for 5 minutes
while cooking is taking place.
WHAT TO DO
AUTO
Turn the oven function selector
0
knob to
.
AUTO
Turn the oven selector knob to
and repeat the operations to start
the Pyrolysis cycle.
Turn the function selector knob
0
to
and wait for the flashing
12.00
to appear. Then start the
programmer, set the time and
start the pyrolysis cycle again.
If the display goes out see the
specific chapter.
Wait for the door to unlock. This
happens automatically when the
temperature inside the oven has
selector
dropped below 300°C (key LED
goes out);
P
with
flashing. Turn the oven
selector knob to
operations to start the Pyrolysis
cycle.
When the door unlocks, which
happens automatically when the
temperature inside the oven has
to cancel
dropped below 300°C (key LED
goes out), the time will appear on
the display again.
Turn the function selector knob
0
to
and wait for the oven to cool
down so that the door unlocks.
Then unplug the oven and call the
After-Sales Service.
Close the oven door.
Close the oven door and press
any programmer key to switch the
audible signal off.
0
P0.00
will appear
0
and repeat the

Advertisement

Table of Contents
loading

Table of Contents