Operation Keys; Navigation Keys - Novus LogBox BLE Instruction Manual

3.2

OPERATION KEYS

To navigate between the screens, LogBox BLE has two keys:
features:
● Short touch (less than 2 seconds):
○ Proceeds to the next screen if the current screen mnemonic is being displayed.
○ Displays the mnemonic of the current screen again if the screen information is displayed.
● Long touch (longer than 2 seconds or held down):
○ Takes any action within the current screen.
● Both keys held down (longer than 2 seconds or held down):
○ Takes a second action within the current screen.
If the Bluetooth interface is enabled, any key that is pressed will make the interface visible with a high frequency for an instant of time. For more
information, refer to chapter CONFIGURATION SOFTWARE.
If the buzzer is active, any key pressed will mute it.
3.3

NAVIGATION KEYS

When navigating between screens, a mnemonic is always displayed to streamline the identification of the information contained in each screen.
This is displayed each time a key is pressed and is visible for 2 seconds. If no key is pressed for this period, the information on the current screen is
displayed. If the key or the
this screen's mnemonic. When the device is displaying the information on a screen, simply press any key to make the mnemonic appear again. To
enter the screen, just wait 2 seconds.
The table below shows all screens, mnemonics and information related thereto, description of information, and key functions on each screen
available in the device.
NOVUS AUTOMATION
key is pressed while a mnemonic is displayed, the device advances to the next or previous screen, displaying
. Each key, depending on the current navigation screen, has two or more
6/65