Setting Up Screen Call - Sanyo Katana User Manual

Setting Up Screen Call

This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or
one that you record. You can also record the caller's message
into the Voice Memo list.
Activating Screen Call
To start Screen Call when you have incoming calls:
When the phone rings or vibrates, press Options (right
softkey) > Screen Call.
To set Auto Screen Call:
1.
Select
2.
Select On.
3.
Set the answering time by using numeric keys or by
pressing the navigation key up or down.
4.
Press OK (left softkey). (The
standby display.)
Tip:
While the caller's message is being recorded, press
call, or press to stop recording and disconnect the call.
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1.
Select
Announcement.
2.
Depending on your preference, select Pre-Recorded
or Custom.
Section 2H: Using Your Phone's Voice Services
>Tools > Voice Services > Screen Call > Auto.
>Tools > Voice Services > Screen Call >
icon is displayed on the
to answer the
135