Using Voice-Activated Dialing - Sanyo Katana User Manual

Using Voice-Activated Dialing

In addition to Sprint PCS Voice Command (see page 215), you
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record
and use to place calls without using the keypad.) Your phone
can store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
Press and hold
Note:
To use the Voice Dial function, you must have stored Voice Tag entries.
(See "Programming Voice Tags"below.)
Tip:
You can also make a call using voice-activated dialing with the phone
closed. Press and hold the Side Volume key (
standby mode, and follow the voice prompts.
Programming Voice Tags
To program a voice tag:
1.
From standby mode, press Contacts (right softkey).
2.
Select a contact and press
3.
Press Options (right softkey) > SetVoiceTag > Add.
4.
After you are prompted to say the name you wish to
program, wait for the beep and then say the name into
your phone's microphone.
5.
Respond to the prompt by repeating the name after the
beep. (The display shows "Voice Tag Recorded.")
Tip:
Record voice dial tags in a quiet environment and without the aid of an
accessory (for example, a headset or hands-free car kit).
Section 2H: Using Your Phone's Voice Services
or .
) up or down while in
.
131