Sanyo Katana User Manual page 113

To turn Call Guard on or off:
1.
Select
2.
Select On or Off.
To place roaming calls with Call Guard on:
1.
From standby mode, dial 1 + area code + the seven-digit
number. (You can also initiate a call from the Contacts,
Call History, or Messaging.)
2.
Press
or Call:Speaker On).
3.
Press
is displayed.
– or –
Press any key to erase the pop-up message, and then
press Options (right softkey) > Roam Call or
Roam:Speaker On.
To answer incoming roaming calls with Call Guard on:
1.
Press
notifying you that roaming charges will apply.)
2.
Press
is displayed.
– or –
Press any key to erase the pop-up message, and then
press Options (right softkey) > Answer or Answer:Speaker.
Note:
If the Call Guard feature is set to On , you need to take extra steps to
make and receive roaming calls.
Section 2D: Controlling Your Roaming Experience
> Settings > Others > Roaming > Call Guard.
(or press Options [right softkey] > Call
or
to proceed while the pop-up message
or . (A message will be displayed
to proceed while the pop-up message
97