Items Supplied; Technical Data; Noise Information - Hilti DX 9 HSN Manual

Display

3.7 Items supplied

Fastening tool, toolbox, cleaning set, scraper, ramrod, Hilti lubricant spray, operating instructions.
Note
You can find other system products approved for use with this product at your local Hilti Center or
online at: www.hilti.com

4 Technical data

4.1 Technical data
Weight
Dimensions (L × W × H)
Magazine capacity
Suitable cartridges
Suitable fasteners
Thickness of the supporting steel
Compression stroke
Contact pressure
Application temperature (ambient tem-
perature)

4.2 Noise information

The noise values listed were determined under the following conditions:
General conditions for noise measurements
Direct fastening tool
Model
Caliber
Power setting
Application
Noise information in accordance with EN 15895
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound (power) level (L
WA
8 English
Printed: 28.06.2017 | Doc-Nr: PUB / 5359693 / 000 / 00
Explanation
The max. number of fasteners driven has been reached. The tool must
be cleaned.
The black square at the lower edge on the right indicates that demo
mode is active. In this case, the information in the display does not
reflect the actual status of the tool.
The Hilti Connect smartphone app can be used to deactivate the
demo mode. Demo mode is automatically deactivated after a period of
15 minutes.
DX 9–HSN
30.0 lb
(13.6 kg)
39.3 in × 17.5 in × 7.4 in
(999 mm × 445 mm × 188 mm)
60 nails / 40 cartridges
6.8/11 M40 red or other cartridges of a type approved for use
with the tool
X­HSN 24
1/8 ... 3/8"
3.5 in
(89 mm)
≥ 81 lb
f
(≥ 360 N)
5 ℉ ...122 ℉
(−15 ℃ ...50 ℃)
DX 9–HSN
Series
6.8/11 red
4
Fastening to steel plate (Brinell hardness 358 N/mm
X–HSN 24
)
pA
)
pA
)
) using the
2
98 dB(A)
2 dB(A)
106 dB(A)