Table of Contents
Advertisement
en
Home Connect
oHome Connect
T his appliance is Wi-Fi-capable and can be remotely
H o m e C o n n e c t
controlled using a mobile device.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven
with no network connection and can still be operated
via the display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
■
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the
Home Connect app.~ "Important safety
information" on page 5
Operating the appliance directly from the appliance
■
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.
Setting up
To set up Home Connect for your appliance, you
require the following:
Your appliance, which must be connected to the
■
mains and switched on,
A smartphone or tablet with the latest version of the
■
iOS or Android operating system,
The Home Connect app,
■
The supplied Home Connect installation instructions,
■
And your appliance within range of the Wi-Fi signal
■
for your home network
Basic setting
WiFi
Network
Connect to app
Remote control
Appliance information
l
Remote diagnostics
Customer Service can use Remote Diagnostics to
access your appliance if you contact them, have your
appliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Note:
For further information and details about the
availability of Remote Diagnostics in your country,
28
Possible settings
Switching on/off
Connecting to the network/
disconnecting from the net-
work
on/off
The app guides you through the entire process. Follow
the instructions in the app.
Remote Start
In order to start and operate your appliance via the
Home Connect app, you must activate remote start. If
remote start has been deactivated, you can only display
the operating statuses in the Home Connect app and
implement appliance settings.
Note:
Some of the operating modes can only be started
on the oven.
Remote start is automatically deactivated:
if you open the oven door 15 minutes after remote
■
start has been activated.
if you open the oven door 15 minutes after the end
■
of operation.
When you start the oven using the controls on the
appliance itself, remote start is automatically activated.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
Press the menu button.
1.
Touch "Remote start".
2.
C
appears in the display.
Home Connect settings
You can adjust Home Connect to suit your
requirements at any time.
Note:
You will find the Home Connect settings in your
appliance's basic settings. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Explanation
You can switch the wireless module on and off. If WiFi is activated, you can use the Home
Connect function. The appliance requires max. 2 W in networked standby.
Switch the network connection on or off as required (e.g. for holiday).
The network information will be retained after the appliance is switched off. After switch-
ing on the appliance, wait for a few seconds while it reconnects to the network.
Start the connection process between the app and the appliance.
Use the Home Connect app to access the appliance's functions. When it is deactivated,
only the operating statuses are displayed in the app.
The display shows the network and appliance information.
please visit the service/support section of your local
website: www.home-connect.com
Advertisement
Table of Contents
