Content Of Packaging P - Pentair SOLEO SB-PF-SOL-003C Installation And User Manual

Contents of the pack and description
Screen
(4 x 20 characters)
Menu navigation buttons
(Esc/Bottom/Top/Valid.)
Status light
(for updates)
Manufacturer's plate
Serial number
SB-PF-SOL-003C SB-SE-SOL-003B
QC Passed MADE IN ITALY
Pentair International Sarl S/N 1234ABCD1234ABCD1234ABCD01 Mfg Year
SCAN
Avenue de Sévelin 18 230 V 50 Hz~/IP64/3.2 W Apr-2019 ME
CH-1004 Lausanne, Switzerland 433.4 MHz
Fuse holder (1 A 250 VAC)
Connector cover
(Removable with a flat screwdriver)
Screw cover
(Insulator of acidic vapours
and humidity circulating
via the screw hole)
Soft cover
(Insulator of acidic vapours
and humidity)
Replace the soft
cover after each
opening.
4 7
CABLE GLANDS x 2
Screw thread: 1/2 inch
The 2 cable glands are compatible with 1/2'' threading for assembly on a bypass. However Pentair advises
installing the pH and RedOx probes in a probe holder.
04
FRONT VIEW
SOLEO
E S S E N T I A L
16:03 Water:+26.3°C
Filtration: ON
RedOx: 736mV
Air:+25.0°C pH: 7.2
ESC
pH4 and pH7 calibration solutions
Necessary for calibrating the pH probe
The pH4 solution is acidic
USB / mini USB
Update of the software
Clamp band
For mounting the water temperature probe
®
P O O L
VALID
pH/ORP probe canister
with (with screw above) = probe out of the water
without = probe in the water
The probe caps are filled with potassium
chloride. !!! DO NOT DRINK!
Tighten/loosen the probe caps.
Never push or pull the fitted probe caps of
the end plug.
Water temperature sensor
(For air as an option)
pH probe
RedOx probe