Setup" Setting - Sony Trinitron WEGA KV-AW212 Operating Instructions Manual

x "Setup" setting
Press WEGA GATE and select "Settings".
Press V or v to select the "Setup" icon ( ),
then press
"Language"
"Video Label"
"Color System"
"Wake Up Timer
Beep"
(KV-AW212M83 only)
"Factory Settings"
KV-AW212M83 only
• To ensure the beeping sound can be heard, you must set an appropriate volume
level on your TV and make sure the TV is not in mute condition.
• To stop the beeping sound, press any buttons on the remote control or front panel.
• If no button is pressed for three minutes, the beeping sound will automatically go
off.
.
Change the menu language.
Press V or v to select either "English" or "
press .
Label the connected equipment.
(1) Select "Video Input" and press
input you want to label, then press
(2) Select "Label" and press
the label options: "Video 1"/"Video 2"/"DVD", "VCR",
"SAT", "Game" or "Edit"*.
* You may edit the video label to your favorite name. Press V or v
to select alphanumeric characters for the label, then press
Select the color system.
Press V or v to select either "Auto", "PAL", "SECAM",
"NTSC3.58" or "NTSC4.43", then press
"Auto".
Allow your TV to emit beeping sound when TV switches on
automatically using wake up timer.
Press V or v to select "On", then press
To cancel, select "Off", then press
Reset your TV to factory settings.
Press and press V or v to select "Yes". Then press
Your TV will go blank for a few seconds, then the "Initial Setup"
menu will appear.
To cancel, select "No", then press
Setup
Language:
Video Label
Color System:
Wake Up Timer Beep:
Factory Settings
Select
Confirm
" (Arabic), then
. Press V or v to select the
.
, then press V or v to select
. Normally, set this to
.
.
.
English
Auto
On
End
.
.
GB
15