Specifications Note KV-AW21N50 Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system NTSC3.58, PAL*, PAL 60*, SECAM*, NTSC4.43* * AV IN only Channel coverage VHF : 2 to 13 /UHF : 14 to 69 /CATV : 1 to 125 8 (Antenna) 75-ohm external terminal Audio output (Speaker)
Page 3
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
Getting Started Step 1 Insert the batteries (supplied) into the remote. • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •...
Page 5
Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Initial Setup” menu will appear. You can adjust settings below using the buttons on the remote control or TV front panel. Press V , v , B or b to select or adjust items, then press Select the desired menu language.
Connecting optional components You can connect a wide range of optional components to your TV. Connecting cables are not supplied. Connecting to the TV (front) Step 1 Step 2 PROG (MONO) WEGA GATE (MONO) Audio/Video cable Camcorder PROG (MONO) WEGA GATE (MONO) Connecting to the TV (rear)
• Count the number of times the 1 (standby) indicator flashes. Press 1 (main power) to turn off your TV. Contact your nearest Sony service center. The TV screen sometimes goes blank for slightly longer than usual during channel change.
TV buttons and remote control Turn off or turn on the TV. Remote control sensor. Wake Up indicator. Standby indicator. PROG +/– Select program number. 2 +/– Adjust volume. PROG WEGA GATE (MONO) Select TV or video input. WEGA GATE menu operations (see H) V,v,B,b Select or adjust items.
Page 9
TV buttons and remote control (continued) Not function for your TV. Select picture mode options: “Vivid”, “Standard”, “Custom”* (see I). * When the “Custom” mode is selected, you can receive the last adjusted picture settings from the “Picture Adjustment” option in the menu. WEGA GATE menu operations (see H) Confirm selected items.
WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs and “Settings” menu. WEGA GATE External Inputs “TV” watch the preset TV Settings channels (see D) Select Confirm Select Confirm External Inputs Video 1 “External Inputs”...
“Picture” setting Press WEGA GATE and select “Settings”. Picture Make sure the “Picture” icon ( ) is selected, Picture Mode: Vivid Picture Adjustment then press Color Temperature: Cool Intelligent Picture: Signal Level Indicator: Select Confirm “Picture Mode” Choose either “Vivid” (bright, contrast and sharp), “Standard”...
“Sound” setting Press WEGA GATE and select “Settings”. Sound Press V or v to select the “Sound” icon ( ), Balance then press Select Confirm “Balance” Press v or B to emphasize the left speaker. Press V or b to emphasize the right speaker.
“Channel Setup” setting Press WEGA GATE and select “Settings”. Channel Setup Cable: Press V or v to select the “Channel Setup” Auto Program Program Edit icon ( ), then press Signal Booster: Auto Select Confirm “Cable” Receive cable TV programs. Press V or v to select “On”, then press If you select “Cable: On”, you will be able to receive 125 cable TV channels.
“Setup” setting Press WEGA GATE and select “Settings”. Setup Language: English Press V or v to select the “Setup” icon ( ), Picture Rotation Video Label then press Color System: NTSC3.58 Factory Settings Select Confirm “Language” Change the menu language. Press V or v to select either “English”...