Sangean RS-330 Operating Instructions Manual page 12

RECALL A STATION
E
To recall a preset station, simply press the BAND button
press P1/P2 to select the page then press the desired Preset button.
SETTING THE CLOCK AND ALARMS
You must press the TIME SET button
can set the clock or the alarm times. (When you plug the clock radio in for the
first time, the display will show 12:00.)
Pressing TIME SET cycles through the settings in this order: clock
Alarm 2 clock, and so forth. You can set the clock or alarms in any order.
When you have finished, do not press TIME SET again. Simply wait a few
seconds for the RS-330 to return to normal operation.
To set the clock, press the TIME SET button
clock display blinks to show that the clock is ready to be set. Press TUNE/TIME
11
buttons to change the display to show the correct time. Pressing the ( )
button will increase the time and ( ) will decrease it. Note that 12:00 AM is
midnight, and 12:00 PM is noon.
Press TIME SET button
Press TUNE/TIME buttons to select the time for Alarm 1. After seven seconds
the display will stop flashing and the ALARM 1 icon will appear indicating Alarm 1
is set.
To set Alarm 2 press TIME SET button
displayed and 7:00 AM will be the "start" setting. Follow the same procedure as
for setting Alarm 1.
UNDERSTANDING THE ALARM SYSTEM
The RS-330' s dual-alarm system is unique. Wake-up time, wake-up mode, and
wake-up volume can be set independently for two people. Operation is therefore
slightly different from other clock radios. When the RS-330 is used alone, both
Alarm 1 and Alarm 2 functions occur through the RS-330.
The most important difference is that the RS-330 and RS-332 operate indepen-
dently during wake up. Radio sound (or the beeper) is channeled to the RS-330
for Alarm 1 and to the RS-332 for Alarm 2. This feature keeps Alarm 1 from
disturbing the sleeper waiting for Alarm 2. The radio also switches to mono
reception for the activated alarm.
RS-330_381B101A.p65
22
on the back of the RS-330 before you
22
22
twice and the 6:00 AM "start" alarm time will flash.
22
three times. ALARM 2 icon will be
9
Page 9
13
to select AM or FM,
on the rear of the unit once. The
2003/6/18, 下午 02:24
Alarm 1
Adobe PageMaker 6.5C/Win