Lenovo 7X12 Reference Manual page 134

Table 3. Events organized by severity (continued)
Message String
Event ID
FQXSFMA0007I [arg1] DIMM number [arg2] has been replaced. [arg3]
FQXSFMA0008I DIMM [arg1] POST memory test failure has been recovered. [arg2]
FQXSFMA0009I Invalid memory configuration for Mirror Mode has been recovered.
[arg1]
FQXSFMA0010I Invalid memory configuration for Sparing Mode has been recovered.
[arg1]
FQXSFMA0011I Memory population change detected. [arg1]
FQXSFMA0012I The PFA of DIMM [arg1] has been deasserted.
FQXSFMA0013I Mirror Fail-over complete. DIMM [arg1] has failed over to to the
mirrored copy. [arg2]
FQXSFMA0014I Memory spare copy initiated. [arg1]
FQXSFMA0015I Memory spare copy has completed successfully. [arg1]
FQXSFMA0026I DIMM [arg1] Self-healing, attempt post package repair (PPR)
succeeded at Rank [arg2] Sub Rank [arg3] Bank [arg4] Row [arg5] on
Device [arg6]. [arg7]
FQXSFMA0029I The PFA of DIMM [arg1] has been deasserted after applying PPR for
this DIMM. [arg2]
FQXSFMA0030I A correctable memory error has been detected on DIMM [arg1]. [arg2]
FQXSFMA0052I DIMM [arg1] has been disabled due to the error on DIMM [arg2].[arg3]
FQXSFMA0065I Multi-bit CE of DIMM [arg1] has been deasserted after performing
post package repair. DIMM identifier is [arg2].
FQXSFPU0020I The UEFI firmware image capsule signature is invalid.
FQXSFPU0021I The TPM physical presence state has been cleared.
FQXSFPU0023I Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
FQXSFPU0025I The default system settings have been restored.
FQXSFPU4034I TPM Firmware recovery is finished, rebooting system to take effect.
FQXSFPU4038I TPM Firmware recovery successful.
FQXSFPU4041I TPM Firmware update is in progress. Please DO NOT power off or
reset system.
FQXSFPU4042I TPM Firmware update is finished, rebooting system to take effect.
FQXSFPU4044I The current TPM firmware version could not support TPM version
toggling.
FQXSFPU4046I TPM Firmware will be updated from TPM1.2 to TPM2.0.
FQXSFPU4047I TPM Firmware will be updated from TPM2.0 to TPM1.2.
FQXSFPU4048I TPM 2.0 firmware will be updated to version 1.3.2.20.
FQXSFPU4049I TPM Firmware update successful.
FQXSFPU4080I Host Power-On password has been changed.
130
ThinkSystem SR950 Messages and Codes Reference
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational