Lenovo 7X12 Reference Manual page 126

Messages and codes reference
Table of Contents

Advertisement

a. Escalate to a next level of support.
6. Note: Check if the customer is using TPM encryption if so then remind to back up the TPM Encryption
Recovery Key or access to the Operating System will be lost after board replacement.
• FQXSPUN2009I: Sensor [SensorElementName] has deasserted.
This message is for the use case when an implementation has detected a Sensor has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0509
User Action:
Information only; no action is required
• FQXSPUN2011I: Sensor [SensorElementName] is deasserting predictive failure.
This message is for the use case when an implementation has detected a Sensor predictive failure was
deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Predicted Failure
SNMP Trap ID: 27
CIM Prefix: PLAT CIM ID: 0511
User Action:
Information only; no action is required
• FQXSPUN2012I: Sensor [SensorElementName] has deasserted.
This message is for the use case when an implementation has detected a Sensor has deasserted.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: System - Other
SNMP Trap ID: 22
CIM Prefix: PLAT CIM ID: 0509
User Action:
Information only; no action is required
• FQXSPUN2018I: Sensor [SensorElementName] has deasserted the transition from normal to non-
critical state.
This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.
Severity: Info
Serviceable: No
Automatically notify Support: No
Alert Category: Warning - Other
SNMP Trap ID: 60
CIM Prefix: PLAT CIM ID: 0521
122
ThinkSystem SR950 Messages and Codes Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem sr9507x117x13

Table of Contents