Linea 2000 DOMO DO-7243S Instruction Booklet page 15

DO-7243S
When putting the plug in the socket, make sure your hands are dry.
Before vacuum you need to remove all large and sharp objects from the floor, to
prevent damage on the filter.
When removing the plug from the socket, take hold of the plug don't pull the cord.
ASSEMBLY
Always remove the plug from the socket before adding or removing accessories.
Flexible hose : Attache the flexible hose to the air intake opening at the front of the
vacuum cleaner. Press the hose until it clicks into position.
Metal tubes : attache the metal tubes to the handle. Attache the floor brush to the metal
tubes.
Accessories : cervical/dust brush and small floor brush.
INSTRUCTIONS FOR USE
Before using the appliance unwind the power cord. Put the plug into the socket. A
yellow marking on the cord indicates the ideal lenght for unwinding the cord. On the
power cord is also a red marking, never unwind the power cord futher than this mar-
king.
Press the on/off button to turn on the unit.
To wind the cord, remove the plug from the socket en hold it while pressing the
rewind button with the other hand. You need to hold the plug while rewinding to
prevent damage during rewinding.
On the handle that is attached to the tubes, is a small slide button for extra suction
control.
CLEANING DUST CONTAINER AND FILTERS
Before cleaning your vacuum cleaner or accessories, always turn off the appliance and
remove the plug from the socket.
Dust container
Take hold of the handle of the dust container and pull it up gently . The dust container
slides out of the appliance.
On the side of the dust container is located a knob.
Keep the container above the dust bin. Press the button on the side of the dust
container. The bottom will open and the dust will fall out.
HEPA filter
You can now clean the HEPA filter inside the the dust container. Round the HEPA
filter is a protection screen, to prevent the dust concentrating inside the HEPA filter. If
you want to clean the HEPA filter. Remove the top lid of the dust container, take out
the HEPA filter and clean it under running water. Let the filter dry in open air before
replacing it in the vacuum cleaner.
Air outlet filter
15