Table of Contents
Advertisement
Adding Expansion Boards
Installing Expansion Boards
To install an ISA or PCI local bus expansion board:
NOTE: Read and fully understand your optional expansion
board's documentation before installing it.
Do not install non-Plug and Play expansion boards until you have
run the ICU to determine what configuration the ICU recommends.
Configure any jumpers on the expansion board and then install the
expansion board.
1. Turn off your computer and monitor.
2. Disconnect all external devices, ac power, and monitor power.
3. Remove the outside cover.
4. Unscrew the metal filler plate(s) from the selected expansion slot.
5-4
Advertisement
Table of Contents
