What is the BIOS Setup Utility?
The BIOS Setup utility enables you to select and store permanently information
about your computer's hardware and software in the battery-backed memory of
the CMOS RAM. This information takes effect each time the computer boots
and can be changed any time you run setup.
You should use the BIOS Setup utility if you experience problems with your hard
disk or if you need to reconfigure or expand your computer.
This chapter provides information on how to configure your computer using the
BIOS Setup utility.
Here are some instances when you might wish to change your computer's initial
setup. You might need to:
•
Change time and date
•
Alter your computer's security level
Using the BIOS Setup Utility
CAUTION: Your computer was setup for normal operation at the
factory and will operate properly without additional configuring.
It is important for you to read carefully and understand this
chapter before attempting to modify your computer's factory
settings. Changing some settings might cause your computer to
operate improperly.
2
2
2-1