Download Print this page

MEGATRONIX MEGALARM MEGA 2500 Operation Manual

2-way lcd 4-channel car alarm security system
Hide thumbs Also See for MEGALARM MEGA 2500:

Advertisement

Quick Links

MEGA 2500
2-WAY LCD 4-CHANNEL
CAR ALARM SECURITY SYSTEM
Operation Manual
MEGATRONIX
CALIFORNIA, U.S.A.
MEGA 2500 OPERATE
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the MEGALARM MEGA 2500 and is the answer not in the manual?

Questions and answers

Summary of Contents for MEGATRONIX MEGALARM MEGA 2500

  • Page 1 MEGA 2500 2-WAY LCD 4-CHANNEL CAR ALARM SECURITY SYSTEM Operation Manual MEGATRONIX CALIFORNIA, U.S.A. MEGA 2500 OPERATE...
  • Page 2 OPERATION: TRANSMITTER OPERATION: Transmitter Button System Function Remark Lock Doors and Arm System Arm and Delete the 2 Stage Shock Sensor Press twice within 3 seconds Arm and Noiseless Mode Press within 3 seconds Arm System and Hidden Alarm Function Press within 3 seconds Silent Arming / Disarming Ignition in "off"...
  • Page 3 Press the button twice more within 3 seconds: The siren chirps once again, the system is now in Noiseless mode. On this mode, for the zone 4 shock sensor, the trigger timer will reduced from 30 seconds to 15 seconds. The noiseless feature is programmed to activate for one arming cycle only.
  • Page 4 J. VALET MODE: (System in Disarm or Valet mode): The valet switch allows you to temporarily bypass all alarm functions, eliminating the need to hand your transmitter to parking attendants or garage mechanics. When the system is in valet mode, all alarm functions are bypassed, however the remote panic feature and remote door locks will remain operational.
  • Page 5 2. Once the system in car-jacking mode, if you are forced from the vehicle, the system will be trigger when the door is opened and closed while the ignition is “ON”. PASSIVE ANTI CAR-JACKING: 1. Turn the ignition switch to “ON” position; the system enters the car-jacking mode. 2.
  • Page 6: Lcd Remote Transceiver

    LCD REMOTE TRANSCEIVER Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or such obstacles like tall buildings and so on, the transmission range may get shorter as the system uses low output powered frequency. A.
  • Page 7 1. Second Vehicle Security Operation: Your remote transmitter can be utilized to control a second vehicle security system. To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. All programming parameters be the same except for the following: For Regular Remote Control Transmitter: 1.
  • Page 8 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.