OWNERS MANUAL
MANUAL DEL PROPIETARIO
Titan
®
733AA051, 733BA051
THANK YOU.
You have purchased a high performance Titan toilet
featuring some of the latest innovations from American
Standard. This powerful 1.6 gallon per flush toilet is rated
highest for flush performance according to the industry's
standard (MaP*) testing.
In addition to great performance, your new toilet also
features a patented EverClean
growth of stain and odor-causing bacteria, mold and mildew
on the entire toilet surface.
At American Standard we continually work harder to raise
the standard of daily living by making it easier, safer and
more beautiful.
GRACIAS.
Ha comprado un inodoro Titan de alto rendimiento que
cuenta con las últimas innovaciones de American
Standard. Este poderoso inodoro de 1,6 galones por
descarga tiene la calificación más alta por rendimiento de
descarga al retirar desechos sólidos según la prueba de
normas de la industria (MaP*).
Además de un rendimiento excelente, su nuevo inodoro
también viene con la superficie patentada EverClean
que inhibe el crecimiento de las bacterias y el moho que
causan el mal olor y las manchas en toda la superficie
del inodoro.
En American Standard continuamente trabajamos más
duro para elevar el nivel de la vida diaria por lo que es
más fácil, más seguro y más hermoso.
Product names listed herein are trademarks of AS America, Inc.
Los nombres de productos que aparecen en este documento son marcas comerciales de AS America, Inc.
© AS America, Inc. 2019
7302161-100 Rev. 2-7/19 EN/SP
surface, which inhibits the
®
,
®
Image shown may vary from product purchased.
Imagen que se muestra puede variar al producto adquirido.
Need help?
Do you have a question about the Titan 733BA051 and is the answer not in the manual?
Questions and answers
How to replace the flapper
To replace the flapper in an American Standard Titan 733BA051 toilet:
1. Shut off the water supply to the toilet.
2. Remove the tank lid.
3. Flush the toilet to drain most of the water from the tank.
4. Disconnect the flush valve chain from the flapper.
5. Remove the old flapper from the flush valve.
6. Clean any debris from the seal surface.
7. Install the new flapper onto the flush valve.
8. Reconnect the flush valve chain, ensuring proper slack.
9. Turn the water supply back on and check for proper sealing.
If the toilet does not shut off after replacement, adjust the chain length or ensure the seal is clean.
This answer is automatically generated