HIKVISION DS-K3G501X Series Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Turnstiles
  5. DS-K3G501X Series
  6. Manual
HIKVISION DS-K3G501X Series Manual

HIKVISION DS-K3G501X Series Manual

Tripod turnstile
Hide thumbs Also See for DS-K3G501X Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K3G501X Series Tripod Turnstile

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K3G501X Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K3G501X Series

Summary of Contents for HIKVISION DS-K3G501X Series

  • Page 1 DS-K3G501X Series Tripod Turnstile...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K3G501X Series Tripod Turnstile Regulatory Information EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive...
  • Page 5 DS-K3G501X Series Tripod Turnstile Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 6 DS-K3G501X Series Tripod Turnstile Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas.
  • Page 7 DS-K3G501X Series Tripod Turnstile Biometric recognition products are not completely applicable to anti-spoofing environments. If ● you require a higher security level, use multiple authentication modes. Do not stay in the lane when the device is rebooting. ● RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED ●...
  • Page 8 DS-K3G501X Series Tripod Turnstile Available Models Product Name Model Tripod Turnstile DS-K3G501X...

  • Page 9: Table Of Contents

    DS-K3G501X Series Tripod Turnstile Contents Chapter 1 Overview ........................1 1.1 Introduction ........................... 1 1.2 Main Features ........................1 Chapter 2 System Wiring ......................3 Chapter 3 Installation ......................... 6 3.1 Disassemble Pedestals ......................6 3.2 Install Pedestals ........................6 Chapter 4 General Wiring ......................
  • Page 10 DS-K3G501X Series Tripod Turnstile 5.1 Activate via SADP ......................... 22 5.2 Activate Device via iVMS-4200 Client Software ..............23 5.3 Activate via Web Browser ....................24 Chapter 6 Operation via Web Browser ..................25 6.1 Login ............................ 25 6.2 Forget Password ........................25 6.3 Live View ..........................
  • Page 11 DS-K3G501X Series Tripod Turnstile 6.6.19 Log Query ........................46 6.6.20 Certificate Management ................... 46 Chapter 7 Client Software Configuration ................... 48 7.1 Configuration Flow of Client Software ................. 48 7.2 Device Management ......................49 7.2.1 Add Device ........................49 7.2.2 Reset Device Password ....................51 7.2.3 Manage Added Devices ....................
  • Page 12 DS-K3G501X Series Tripod Turnstile 7.8.1 Control Door Status ..................... 71 7.8.2 Check Real-Time Access Records ................72 Appendix A. DIP Switch ......................74 A.1 DIP Switch Description ......................74 A.2 DIP Switch Corresponded Functions ..................74 Appendix B. Button Configuration Description ................75 Appendix C.

  • Page 13: Chapter 1 Overview

    DS-K3G501X Series Tripod Turnstile Chapter 1 Overview 1.1 Introduction The tripod turnstile is designed to detect unauthorized entrance or exit. By adopting the turnstile integratedly with the access control system, person should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc. It is widely used in attractions, stadiums, construction sites, residences, etc.
  • Page 14 DS-K3G501X Series Tripod Turnstile Support PC web browser, easy to do the configuration. ● Support ISAPI protocol for 3rd party integration development. ●...

  • Page 15: Chapter 2 System Wiring

    DS-K3G501X Series Tripod Turnstile Chapter 2 System Wiring The preparation before installation and general wiring. Steps 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals.
  • Page 16 DS-K3G501X Series Tripod Turnstile Figure 2-1 System Wiring Diagram Note High voltage: AC power input ● Low voltage: network cable (CAT5E, CAT6 or CAT6E), interconnecting data cable and interconnecting power cable. The supplied interconnecting power cable length is 3.75 m, if necessary, you can contact the ●...
  • Page 17 DS-K3G501X Series Tripod Turnstile If you want to bury both of the high voltage cable and the interconnecting cable, the two ● cables should be in separated conduits to avoid interference. If more peripherals are required to connect, you should increase the conduit diameter or bury ●...

  • Page 18: Chapter 3 Installation

    DS-K3G501X Series Tripod Turnstile Chapter 3 Installation 3.1 Disassemble Pedestals Before installation, you should use the key to open the pedestals. View the pictures below to find the lock holes. Figure 3-1 Lock Holes 3.2 Install Pedestals Before You Start Prepare for the installation tools, check the device and the accessories, and clear the installation base.
  • Page 19 DS-K3G501X Series Tripod Turnstile adhesive at the film cutting position. It is recommended to use WD-40 protective liquid to wipe after tearing the film. The dimension is as follows. ● Figure 3-2 Dimension 1. Prepare for the installation tools, check the components, and prepare for the installation base.

  • Page 20: Chapter 4 General Wiring

    DS-K3G501X Series Tripod Turnstile Chapter 4 General Wiring Note After maintenance, you should close the water-proof cover over the high/low voltage module. ● When you should maintain or disassemble the high voltage modules, you should remove the ● entire high voltage modules and maintain it outside the turnstile. You should unplug the cables that connected to the peripherals before maintenance to avoid destroy of the device.

  • Page 21: Wiring

    DS-K3G501X Series Tripod Turnstile The picture displayed below describes the serial port on the entrance and exit direction. Figure 4-2 Serial Port 4.2 Wiring Scan the QR code to view the wiring guide video.

  • Page 22: Wiring Electric Supply

    DS-K3G501X Series Tripod Turnstile 4.3 Wiring Electric Supply Wire electric supply with the power switch or power adapter in the pedestal. Terminal L (brown) and terminal N (Blue) are on the switch, while terminal PE should connect to a ground wire (yellow and green wire).

  • Page 23: Terminal Description

    DS-K3G501X Series Tripod Turnstile The switching power supply can select the input voltage of 220 V or 110 V by the DIP switch, and the default setting is 220V. Please adjust the DIP switch based on the actual AC voltage to avoid damaging the equipment.

  • Page 24: Access Control Board Terminal Description

    DS-K3G501X Series Tripod Turnstile 4.4.2 Access Control Board Terminal Description Access control board is mainly used for authority identification in places with high security levels such as public security or judicial place, external device accessing, and communication with the upper platform and lane controller.
  • Page 25 DS-K3G501X Series Tripod Turnstile Note RS-485A corresponds to UART 5 on web and is for QR code scanner connection at entrance by ● default; RS-485C corresponds to UART 7 on web and is for card reader connection at entrance by default.

  • Page 26: Main Optional Board Terminal Description

    DS-K3G501X Series Tripod Turnstile Note RS-232A corresponds to UART 1 on web. 4.4.3 Main Optional Board Terminal Description The main optional board contains the sub-1G antenna interface, loudspeaker interface, debugging port, Wiegand/exit button interface, 5 VDC output and communication interface.

  • Page 27: Card Reader Board Terminal Description

    DS-K3G501X Series Tripod Turnstile Note RS-485B corresponds to port 6 on web and is for QR code scanner connection by default. ● RS-485D corresponds to port 4 on web and is for card reader connection by default. ● RS-232B corresponds to port 2 on web and is for fingerprint reader connection by default.

  • Page 28: Rs-232 Wiring

    DS-K3G501X Series Tripod Turnstile Figure 4-7 Wiring RS-485 4.4.7 RS-232 Wiring Note There is 1 RS-232 interface on the extended interface of access control board, see Access Control ● Board Terminal Description . The RS-232A corresponds to UART 1 on web.

  • Page 29: Exit Button Wiring

    DS-K3G501X Series Tripod Turnstile Figure 4-9 Remaining Open Figure 4-10 Remaining Closed 4.4.9 Exit Button Wiring The main and sub lane control board each has 1 button interface, which can be connected to exit button or face recognition device. Figure 4-11 Exit Button Wiring...

  • Page 30: Device Settings Via Button

    DS-K3G501X Series Tripod Turnstile Note The face recognition devices are powered via 12 VDC power output interface of the main and ● sub lane control board. Barrier open at the entrance: connect to BTN1 and GND. ● Barrier open at the exit: connect to BTN2 and GND.
  • Page 31 DS-K3G501X Series Tripod Turnstile Note Configuration data is displayed by two digital tubes. ● Level-1 Menu: If the decimal point on the right is on, it indicates the level-1 menu. The ● number represents the configuration item number. Level-2 Menu: if the decimal point in the middle is on, it indicates the level -2 menu. The ●...

  • Page 32: Initialize Device

    DS-K3G501X Series Tripod Turnstile 1. Enter the configuration mode. The number of 1 will show up on the right side of the screen and the device is ready for configuration. 2. Press LEFT and RIGHT to set the configuration No. Press OK to enter the level-2 menu and view the parameters.
  • Page 33 DS-K3G501X Series Tripod Turnstile Steps Note For details about button's operation, see Configuration via Button . ● For details about the configuration No. and its related function, see Button Configuration ● Description . For details about the keyfob operation instructions, see the keyfob's user manual.

  • Page 34: Chapter 5 Activation

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 35: Activate Device Via Ivms-4200 Client Software

    DS-K3G501X Series Tripod Turnstile Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.

  • Page 36: Activate Via Web Browser

    DS-K3G501X Series Tripod Turnstile Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 37: Chapter 6 Operation Via Web Browser

    Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.

  • Page 38: Person Management

    DS-K3G501X Series Tripod Turnstile Device Component Status You can check if the device is working properly. Click View More to view the detailed component status. Remote Control The door is opened/closed/remaining open/remaining closed. Real-Time Event You can view the event Employee ID, Name, Card No., Event Type, Time, and Operation. You can also click View More to enter the search conditions, including the event type, employee ID, the name, the card No., the start time, and the end time, and click Search.
  • Page 39 DS-K3G501X Series Tripod Turnstile Figure 6-1 Person Management Add Basic Information Click Person Management → Add to enter the Add Person page. Add the person's basic information, including the employee ID, the person's name, etc. Click Save to save the settings.

  • Page 40: Search Event

    DS-K3G501X Series Tripod Turnstile Set the authentication type. If you select Custom, you can set authentication method as fingerprint, card, etc. Click Save to save the settings. Add Card Click Person Management → Add to enter the Add Person page.

  • Page 41: Configuration

    DS-K3G501X Series Tripod Turnstile Figure 6-2 Search Event Select the event type and enter the search conditions, including the employee ID, name, card No., start time, and end time, and click Search. The results will be displayed on the right panel.

  • Page 42: Set Dst

    DS-K3G501X Series Tripod Turnstile You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.

  • Page 43: View Device Arming/Disarming Information

    DS-K3G501X Series Tripod Turnstile 6.6.6 View Device Arming/Disarming Information View device arming type and arming IP address. Go to Configuration → User Management → Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page.
  • Page 44 DS-K3G501X Series Tripod Turnstile If you disable DHCP, you should manually set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, preferred DNS server, and alternate DNS server. If you enable DHCP, the system will automatically allocate the IPv4 address, IPv4 subnet mask, the IPv4 default gateway preferred DNS server and alternate DNS server.

  • Page 45: Set Audio Parameters

    DS-K3G501X Series Tripod Turnstile Note The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol to receive the alarm information. 6.6.8 Set Audio Parameters Set the audio parameters. Click Configuration → Video/Audio → Audio . Figure 6-5 Audio Settings Page Set the output volume, and enable voice prompt according to your needs.
  • Page 46 DS-K3G501X Series Tripod Turnstile Figure 6-6 Event Linkage 2. Set event source. - If you choose Linkage Type as Event Linkage, you need to select event types from the drop- down list. - If you choose Linkage Type as Card Linkage, you need to enter the card No. and select the card reader.

  • Page 47: Access Control Settings

    DS-K3G501X Series Tripod Turnstile 4. Click Save to save the settings. 6.6.10 Access Control Settings Set Authentication Parameters Click Configuration → Access Control → Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details.
  • Page 48 DS-K3G501X Series Tripod Turnstile Select an authentication mode according to your actual needs from the drop-down list. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed.
  • Page 49 DS-K3G501X Series Tripod Turnstile Serial Port Settings Set serial port parameters. Steps 1. Click Configuration → Access Control → Serial Port Settings . 2. Set the No., Baud Rate, Data Bit, Stop Bit and Parity. 3. Set the Peripheral Type as Card Reader, Card Receiver, QR Code Scanner, Fingerprint Module or Disable.

  • Page 50: Turnstile

    DS-K3G501X Series Tripod Turnstile Permission Free Mode The device only judge your credential is in the valid duration, and will not authenticate the permission. Enable Verify Credential Locally, the device will check permission but not estimate the plan template. Access Control Mode The access control mode is the device normal mode.
  • Page 51 DS-K3G501X Series Tripod Turnstile 4. Click Save. keyfob Set keyfob parameters. Steps 1. Click Configuration → Turnstile Configuration → Keyfob to enter the page. Figure 6-9 keyfob 2. View the keyfob working status. 3. Set Working Mode as One-to-One or One-to-Many.
  • Page 52 DS-K3G501X Series Tripod Turnstile Figure 6-10 People Counting 2. Enable People Counting. 3. Enable Device Offline People Counting at your actual needs. Note Passing Event Recording is reserved. 4. Select Person Statistics Type as Invalid, Passing Detection or Authentication Number.

  • Page 53: Card Settings

    DS-K3G501X Series Tripod Turnstile 7. Click Save. 6.6.12 Card Settings Set Card Security Click Configuration → Card Settings → Card Type to enter the settings page. Set the parameters and click Save. Enable NFC Card Reserved. Enable M1 Card Enable M1 card and authenticating by presenting M1 card is available.

  • Page 54: Set Privacy Parameters

    DS-K3G501X Series Tripod Turnstile 6.6.13 Set Privacy Parameters Set the event storage type. Go to Configuration → Security → Privacy Settings The event storage type is overwriting by default. The earliest 5% events will be deleted when the system detects the stored events has been over 95% of the full space.
  • Page 55 DS-K3G501X Series Tripod Turnstile Figure 6-11 Customize Audio Content 2. Enable the function. 3. Set the appellation. 4. Set the time period when authentication succeeded. 1) Click Add Time Duration. 2) Set the time duration. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content.

  • Page 56: Upgrade And Maintenance

    DS-K3G501X Series Tripod Turnstile 3) Select the voice prompt type. 4) Enter the audio prompt content or select audio file. Note You can click + Audio File or Audio File Management to add audio files. 5) Optional: Repeat substep 1 to 3.

  • Page 57: Device Debugging

    DS-K3G501X Series Tripod Turnstile Note You can import the exported device parameters to another device. Import Click and select the file to import. Click Import to start import configuration file. 6.6.17 Device Debugging You can set device debugging parameters. Steps 1.

  • Page 58: Log Query

    DS-K3G501X Series Tripod Turnstile You can view the status of the barrier and the keyfob receiving module. 6.6.19 Log Query You can search and view the device logs. Go to Maintenance and Security → Maintenance → Log . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search.
  • Page 59 DS-K3G501X Series Tripod Turnstile Install Other Authorized Certificate If you already has an authorized certificate (not created by the device), you can import it to the device directly. Steps 1. Go to Maintenance and Security → Security → Certificate Management .

  • Page 60: Chapter 7 Client Software Configuration

    DS-K3G501X Series Tripod Turnstile Chapter 7 Client Software Configuration You can call the hotline to get the iVMS-4200 client software installation package. 7.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 7-1 Flow Diagram of Configuration on Client Software...

  • Page 61: Device Management

    DS-K3G501X Series Tripod Turnstile 7.2 Device Management The client supports managing access control devices and video intercom devices. Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations.
  • Page 62 DS-K3G501X Series Tripod Turnstile Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 63: Reset Device Password

    DS-K3G501X Series Tripod Turnstile Note For detailed description of the required fields, refer to the introductions in the template. Adding Mode Enter 0 or 1 or 2. Address Edit the address of the device. Port Enter the device port number. The default port number is 8000.

  • Page 64: Manage Added Devices

    DS-K3G501X Series Tripod Turnstile 4. Reset the device password. - Click Generate to pop up the QR Code window and click Download to save the QR code to your PC. You can also take a photo of the QR code to save it to your phone. Send the picture to our technical support.

  • Page 65: Group Management

    DS-K3G501X Series Tripod Turnstile 7.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management.

  • Page 66: Person Management

    DS-K3G501X Series Tripod Turnstile Note You can click to switch the resource display mode to thumbnail view or to list view. 6. Click Import to import the selected resources to the group. 7.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc.
  • Page 67 DS-K3G501X Series Tripod Turnstile Steps 1. Enter Person module. Note For the first time you enter Person module, a window pops up, and you can set the rules to generate person ID (letters and numbers supported) when adding person. When getting person information from device, if there are no person IDs, the person IDs will be generated according to the rule.

  • Page 68: Collect Fingerprint Via Client

    DS-K3G501X Series Tripod Turnstile 7.4.3 Collect Fingerprint via Client Collecting fingerprints locally means you can collect the fingerprint via the fingerprint recorder or the enrollment station connected directly to the PC running the client. The fingerprints recorded can be used as credentials of the persons to access the authorized doors.
  • Page 69 DS-K3G501X Series Tripod Turnstile Steps 1. Enter the Person module. 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel.

  • Page 70: Get Person Information From Access Control Device

    DS-K3G501X Series Tripod Turnstile 7.4.5 Get Person Information from Access Control Device If the access control device has been configured with person information (including person details, fingerprint, and issued card information), you can get the person information from the added device and import them to the client for further operations.

  • Page 71: Report Card Loss

    DS-K3G501X Series Tripod Turnstile The selected persons with no card issued in the person group will be displayed in the right ● panel. If you do not select the persons with no card issued in a person group, all the added persons ●...

  • Page 72: Configure Schedule And Template

    DS-K3G501X Series Tripod Turnstile device to get the card number. As a result, before issuing a card to one person, you need to set the card issuing parameters including the issuing mode and related parameters. When adding a card to one person, click Settings to open the Card Issuing Settings window.

  • Page 73: Add Holiday

    DS-K3G501X Series Tripod Turnstile Note For access group settings, refer to Set Access Group to Assign Access Authorization to Persons . 7.5.1 Add Holiday You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day.

  • Page 74: Add Template

    DS-K3G501X Series Tripod Turnstile 7.5.2 Add Template Template includes week schedule and holiday. You can set week schedule and assign the time duration of access authorization for different person or group. You can also select the added holiday(s) for the template.

  • Page 75: Set Access Group To Assign Access Authorization To Persons

    DS-K3G501X Series Tripod Turnstile 2) Select a holiday in the left list and it will be added to the selected list on the right panel. 3) Optional: Click Add to add a new holiday. Note For details about adding a holiday, refer to Add Holiday .
  • Page 76 DS-K3G501X Series Tripod Turnstile Figure 7-3 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device.

  • Page 77: Configure Advanced Functions

    DS-K3G501X Series Tripod Turnstile Note If you change the persons' access information or other related information, you will view the prompt Access Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later.
  • Page 78 DS-K3G501X Series Tripod Turnstile Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Before You Start Add access control device to the client.
  • Page 79 DS-K3G501X Series Tripod Turnstile Steps 1. Click Access Control → Advanced Function → Device Parameter . 2. Select an access control device on the left panel, and then click to show the doors or floors of the selected device. 3. Select a door or floor to show its parameters on the right page.
  • Page 80 DS-K3G501X Series Tripod Turnstile Note The displayed parameters may vary for different access control devices. There are part of ● parameters listed as follows. Refer to the user manual of the device for more details. Some of the following parameters are not listed in the Basic Information page, click More to ●...

  • Page 81: Configure Device Parameters

    DS-K3G501X Series Tripod Turnstile 5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output. Configure Parameters for Lane Controller After adding the lane controller to the client, you can configure its parameters for passing through the lane.

  • Page 82: Door Control

    DS-K3G501X Series Tripod Turnstile Set RS-485 Parameters You can set the access control device's RS-485 parameters including the baud rate, data bit, the stop bit, parity type, flow control type, communication mode, work mode, and connection mode. Before You Start Add access control device to the client, and make sure the device supports RS-485 interface.

  • Page 83: Control Door Status

    DS-K3G501X Series Tripod Turnstile door open/closed via the client remotely. The real-time access event are displayed in this module. You can view the access details and person details. Note For the user with door control permission, the user can enter the Monitoring module and control the door.

  • Page 84: Check Real-Time Access Records

    DS-K3G501X Series Tripod Turnstile The door will be closed and locked. No person can access the door even if he/she has the authorized credentials, except the super users. Remain All Unlocked All doors in the group will be unlocked (no matter closed or open). All the persons can access the doors with no credentials required.
  • Page 85 DS-K3G501X Series Tripod Turnstile Real-time access records are displayed on the bottom of the page. You can view record details, including card No., person name, event time, door location, temperature, authentication type etc. Figure 7-5 Real-time Access Records Note You can right click the column name of access event table to show or hide the column according to actual needs.

  • Page 86: Appendix A. Dip Switch

    DS-K3G501X Series Tripod Turnstile Appendix A. DIP Switch A.1 DIP Switch Description The DIP switch is on the access control board. No.1 and No 2 is from the low bit to the high bit. Figure A-1 DIP Switch When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off.

  • Page 87: Appendix B. Button Configuration Description

    DS-K3G501X Series Tripod Turnstile Appendix B. Button Configuration Description Refer to the table below for device configuration via button on the main lane control board. Level-1 Configuration No. Description Level-1 Configuration No. and Functions keyfob Pairing Mode 1-Normal Mode 2-Pairing Mode...
  • Page 88 DS-K3G501X Series Tripod Turnstile Level-1 Configuration No. Description Level-1 Configuration No. and Functions 2-One to multiple Note By default, 1 will be displayed on the display screen. Enter Duration 5-5s，6-6s，7-7s, ..., 60-60s Note By default, 5 will be displayed on the display screen.
  • Page 89 DS-K3G501X Series Tripod Turnstile Level-1 Configuration No. Description Level-1 Configuration No. and Functions Note By default, 1 will be displayed on the display screen. Reverse Passing 1-Disable 2-Enable Note By default, 1 will be displayed on the display screen. Exceeding Passing Duration...
  • Page 90 DS-K3G501X Series Tripod Turnstile Level-1 Configuration No. Description Level-1 Configuration No. and Functions Expired Certificate 1-Disable 2-Enable Note By default, 1 will be displayed on the display screen. Brightness of Light 0-0，1-1，2-2, … , 10-10 Note By default, 6 will be displayed on the display screen.

  • Page 91: Appendix C. Event And Alarm Type

    DS-K3G501X Series Tripod Turnstile Appendix C. Event and Alarm Type Event Alarm Type Passing Timeout None...

  • Page 92: Appendix D. Table Of Audio Index Related Content

    DS-K3G501X Series Tripod Turnstile Appendix D. Table of Audio Index Related Content Index Content Authenticated. Card No. does not exist. Card No. and fingerprint mismatch. Passing timeout. No permissions. Authentication time out. Authentication failed. Expired card.

  • Page 93: Appendix E. Error Code Description

    DS-K3G501X Series Tripod Turnstile Appendix E. Error Code Description The turnstile will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason Code Error Reason...
  • Page 94 UD33130B...

Table of Contents