HIKVISION DS-K3G301 X Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Turnstiles
  5. DS-K3G301 X Series
  6. User manual
HIKVISION DS-K3G301 X Series User Manual

HIKVISION DS-K3G301 X Series User Manual

Tripod turnstile
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K3G301(L)X Series Tripod Turnstile
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K3G301 X Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K3G301 X Series

Summary of Contents for HIKVISION DS-K3G301 X Series

  • Page 1 DS-K3G301(L)X Series Tripod Turnstile User Manual...

  • Page 2: Safety Instruction

    DS-K3G301(L)X Series Tripod Turnstile User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death. Cautions: Neglecting any of the cautions may cause injury or equipment damage.
  • Page 3 DS-K3G301(L)X Series Tripod Turnstile User Manual Do not ingest battery, Chemical Burn Hazard. ● This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children.
  • Page 4 DS-K3G301(L)X Series Tripod Turnstile User Manual Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). Do not place the device in extremely hot (refer to the specification of the device for the detailed ●...

  • Page 5: Table Of Contents

    DS-K3G301(L)X Series Tripod Turnstile User Manual Contents Chapter 1 Wiring ........................1 Appendix A. Legal Information ....................77 Chapter 2 Overview ........................2 2.1 Introduction ........................... 2 2.2 Main Features ........................2 Chapter 3 System Wiring ......................3 Chapter 4 Install Pedestals ......................6 Chapter 5 General Wiring ......................
  • Page 6 DS-K3G301(L)X Series Tripod Turnstile User Manual 6.3 Activate Device via iVMS-4200 Client Software ..............27 Chapter 7 Quick Operation via Web Browser ................29 7.1 Time Settings ........................29 Chapter 8 Operation via Web Browser ..................30 8.1 Login ............................ 30 8.2 Live View ..........................
  • Page 7 DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 9 Configure the Device via the Mobile Browser ............56 9.1 Login ............................ 56 9.2 Overview ..........................56 9.3 Configuration ........................59 9.3.1 Turnstile Basic Parameters ..................59 9.3.2 Person Management ....................59 9.3.3 Keyfob Settings ......................

  • Page 8: Chapter 1 Wiring

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 1 Wiring Scan the QR code to view the wiring guide video.

  • Page 9: Chapter 2 Overview

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 2 Overview 2.1 Introduction By adopting the turnstile integratedly with the access control system, person should authenticate to pass through the lane via presenting cards, face, or QR code, etc. It is widely used in attractions, office, construction sites, residences and other indoor scenes.

  • Page 10: Chapter 3 System Wiring

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 3 System Wiring The preparation before installation and general wiring. Steps 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals. Note The distance between the nearest two line is 783 mm.
  • Page 11 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 3-1 Hole Position Diagram 4. Bury cables. Each lane buries 1 network cable and 1 high voltage cable. For details, see the system wiring diagram below. Note High voltage: 100 to 240 VAC, 50 to 60 Hz AC power input ●...
  • Page 12 DS-K3G301(L)X Series Tripod Turnstile User Manual The external AC power cord should be double-insulated. ● The network cable must be CAT5e or other cables with better performance. ● Before digging holes, evaluate the thickness of the installation surface to avoid puncturing. ●...

  • Page 13: Chapter 4 Install Pedestals

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 4 Install Pedestals Before You Start Prepare for the installation tools, check the device and the accessories, and clear the installation base. Steps Note Make sure the device is installed on flat surface. The foundation should be hard and the ●...
  • Page 14 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 4-1 Lock Hole 4. Loosen four screws on the top with the screwdriver and remove the maintenance door on both sides.
  • Page 15 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 4-2 Screws of Maintenance Door 5. Secure each pedestal with expansion bolts, and fix the top cover and maintenance door to its original position.
  • Page 16 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 4-3 Expansion Bolts...

  • Page 17: Chapter 5 General Wiring

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 5 General Wiring 5.1 Components Introduction By default, basic components of the turnstile are connected well. The pedestals can communicate by wiring the network cable and peripherals. And the turnstile supports wiring the AC electric supply for the whole system's power supply.

  • Page 18: General Wiring

    DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 5-2 Serial Port Serial Port No. on WEB Communication Method Peripheral Type Port 1 RS-232A QR Code Scanner (Entrance) Port 2 RS-232B QR Code Scanner (Exit) Port 3 RS-485A QR Code Scanner (Entrance) Port 4 RS-485B QR Code Scanner (Exit)
  • Page 19 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 5-3 General Wiring Note The power cable from main switch to the lane control board has been connected. You will need ● to prepare the 14AWG power cable to connect the AC power input to power supply. Barrier opens at the entrance/exit: connect to BTN1/BTN2 and GND.

  • Page 20: Terminal Description

    DS-K3G301(L)X Series Tripod Turnstile User Manual 5.4 Terminal Description 5.4.1 Lane Control Board Terminal Description The lane control board contains power input interface, exit button and fire input interface, access control board interface, debugging port, indicator interface, etc. The picture displayed below is the lane control board diagram. 5.4.2 Access Board (Optional) Access board is mainly used for authority identification in places with high security levels such as public security or judicial place, external device accessing, and communication with the upper...
  • Page 21 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 5-4 Access Board Note RS-485A corresponds to port 3 on web and is for QR code scanner at entrance by default. ● RS-485C corresponds to port 5 on web and is for card reader at entrance by default. The SOC serial port are for maintenance and debugging use only.
  • Page 22 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 5-5 Wring Diagram of BUS3 Interface...
  • Page 23 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 5-6 Wring Diagram of BUS1 Interface Note RS-485B corresponds to port 4 on web and is for QR code scanner at exit by default. ● RS-485D corresponds to port 6 on web and is for card reader at exit by default. ●...

  • Page 24: Card Reader

    DS-K3G301(L)X Series Tripod Turnstile User Manual 5.4.3 Card Reader The card reader can be connected to the BUS4 of the access board. Figure 5-7 Card Reader 5.4.4 RS-485 Wiring The RS-485 interfaces on the access control board are suggested to connect with the face recognition module or the card reader.

  • Page 25: Rs-232 Wiring

    DS-K3G301(L)X Series Tripod Turnstile User Manual Note If there are other RS-485 devices connecting, the ID of the RS-485 cannot be conflicted. ● The connected 12 V power interface for the face recognition terminal cannot be connected with ● other 12 V devices. Figure 5-8 Wiring RS-485 5.4.5 RS-232 Wiring Note...

  • Page 26: Exit Button Wiring

    DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 5-10 Alarm Input 5.4.7 Exit Button Wiring The lane control board has 1 button interface, which can be connected to exit button or face recognition device. Figure 5-11 Exit Button Wiring...

  • Page 27: Device Settings Via Button

    DS-K3G301(L)X Series Tripod Turnstile User Manual Note Barrier open at the entrance: connect to BTN1 and GND. ● Barrier open at the exit: connect to BTN2 and GND. ● The power supply for the face recognition terminal is 12 V, 2 A, 24 W. ●...
  • Page 28 DS-K3G301(L)X Series Tripod Turnstile User Manual Note Configuration data is displayed by two digital tubes. ● Level-1 Menu: If the decimal point on the right is on, it indicates the level-1 menu. The ● number represents the configuration item number. Level-2 Menu: if the decimal point in the middle is on, it indicates the level -2 menu.

  • Page 29: Keyfob Pairing

    DS-K3G301(L)X Series Tripod Turnstile User Manual 1. Enter the configuration mode. The number of 1 will show up on the right side of the screen and the device is ready for configuration. 2. Press LEFT and RIGHT to set the configuration No. Press OK to enter the level-2 menu and view the parameters.

  • Page 30: Initialize Device

    DS-K3G301(L)X Series Tripod Turnstile User Manual Before You Start Ask our technique supports or sales and purchase the keyfob. Steps 1. Power off the turnstile. 2. Set the No.2 switch of the DIP Switch on the access control board to the ON side. Figure 5-14 Enable Keyfob Paring Mode 3.
  • Page 31 DS-K3G301(L)X Series Tripod Turnstile User Manual Caution The initialization of the device will restore all the parameters to the default setting and all the device events are deleted. Note Make sure no persons are in the lane when powering on the device.

  • Page 32: Chapter 6 Activation

    ● insensitive), 4 or more continuously increasing or decreasing digits, or 4 or more consecutively repeated characters. Password cannot contain words such as hik, hkws, and hikvision (case insensitive). ● 3. Click Activate. 4. Edit the device IP address. You can edit the IP address via the SADP tool, the device, and the...

  • Page 33: Activate Via Sadp

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 34: Activate Device Via Ivms-4200 Client Software

    DS-K3G301(L)X Series Tripod Turnstile User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 35 DS-K3G301(L)X Series Tripod Turnstile User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 36: Chapter 7 Quick Operation Via Web Browser

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 7 Quick Operation via Web Browser 7.1 Time Settings Click in the top right of the web page to enter the wizard page. Device Time Display the device time in real time. Time Zone Select the device located time zone from the drop-down list.

  • Page 37: Chapter 8 Operation Via Web Browser

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. Login via Web Browser Enter the device IP address in the address bar of the web browser and press Enter to enter the login page.

  • Page 38: Person Management

    DS-K3G301(L)X Series Tripod Turnstile User Manual You can view the model, serial No. and firmware version. Device Capacity You can view the person, card and event capacity. 8.3 Person Management Click Add to add the person's information, including the basic information, certificate, authentication and settings.

  • Page 39: Authentication Settings

    DS-K3G301(L)X Series Tripod Turnstile User Manual Add Card Click Person Management → Add to enter the Add Person page. Click Add Card, enter the Card No. and select the Property, and click OK to add the card. Note Up to 50 cards can be added. Click Save to save the settings.

  • Page 40: Configuration

    DS-K3G301(L)X Series Tripod Turnstile User Manual 8.5 Configuration 8.5.1 View Device Information View the device name, device No., language, model, serial No., version, number of channels, IO input, IO output, lock, alarm input, alarm output, and device capacity, etc. Click Configuration → System → System Settings → Basic Information to enter the configuration page.

  • Page 41: Set Dst

    DS-K3G301(L)X Series Tripod Turnstile User Manual Select the device located time zone from the drop-down list. Time Sync. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.

  • Page 42: Online Users

    DS-K3G301(L)X Series Tripod Turnstile User Manual 8.5.5 Online Users The information of users logging into the device is shown. Go to Configuration → User Management → Online Users to view the list of online users. 8.5.6 View Device Arming/Disarming Information View device arming type and arming IP address.
  • Page 43 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 8-3 Set TCP/IP NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU.
  • Page 44 DS-K3G301(L)X Series Tripod Turnstile User Manual Note Only when DHCP is enabled can DNS server be set. Set the preferred DNS server and the alternate DNS server according to your actual need. IPv6 Mode Manual Set the IPv6 address, IPv6 subnet prefix length and IPv6 default gateway manually. DHCP The system will allocate the IPv6 address, IPv6 subnet prefix length and IPv6 default gateway automatically.
  • Page 45 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 8-4 Set Port HTTP It refers to the port through which the browser accesses the device. For example, when the HTTP Port is modified to 81, you need to enter http://192.0.0.65:81 in the browser for login. HTTPS Set the HTTPS for accessing the browser.
  • Page 46 DS-K3G301(L)X Series Tripod Turnstile User Manual Note The event alarm IP address or domain name should support the HTTP protocol/HTTPS protocol to receive the alarm information. You can also click Reset to reset the HTTP listening parameters. Set Network Penetration Service When the device is deployed on the LAN, penetration service can be enabled to achieve remote device management.

  • Page 47: Platform Access

    DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 8-5 Set OTAP 2. Click to Enable OTAP. 3. Set Server IP Address, Port, Device ID and Encryption Key. 4. Click Test to ensure the device can connect to the server and register successfully. Refresh the page or restart the device to see the Register Status.

  • Page 48: Set Audio Parameters

    DS-K3G301(L)X Series Tripod Turnstile User Manual - Binding via Code: Click View to view device QR code. Scan the QR code to bind the account. - Manual Binding: View account verification code by the path: Phone APP-My-Account. Enter the User Token, and click Bind to bind the account. 8.5.8 Set Audio Parameters Set the audio parameters.

  • Page 49: Access Control Settings

    DS-K3G301(L)X Series Tripod Turnstile User Manual 8.5.10 Access Control Settings Set Authentication Parameters Click Configuration → Access Control → Authentication Settings . Note The functions vary according to different models. Refers to the actual device for details. Figure 8-6 Set Authentication Parameters Click Save to save the settings after the configuration.
  • Page 50 DS-K3G301(L)X Series Tripod Turnstile User Manual Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. Alarm of Max. Failed Attempts Enable to report alarm when the card reading attempts reach the set value.
  • Page 51 DS-K3G301(L)X Series Tripod Turnstile User Manual Serial Port Settings Set serial port parameters. Steps 1. Click Configuration → Access Control → Serial Port Configuration . Figure 8-7 Serial Port Configuration 2. Select a serial port No., and the corresponding serial port type will display automatically. 3.
  • Page 52 DS-K3G301(L)X Series Tripod Turnstile User Manual Select the serial communication error detection principle. You can choose to detect that the number of 1 of the data bits and check digits is odd or even, or that there is no check digit. 4.

  • Page 53: Turnstile

    DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 8-8 Terminal Parameters 2. Set the device working mode. Permission Free Mode The device will not verify the person's permission, but only the person's validity period. If the person is in the validity period, the barrier will open. You can enable Verify Credential Locally.
  • Page 54 DS-K3G301(L)X Series Tripod Turnstile User Manual Steps 1. Click Configuration → Turnstile Configuration → Basic Settings to enter the page. 2. View the Channel Type, Channel Model and Working Status. 3. Set the passing mode. - If you choose General Passing, you can select the barrier status for the entrance and exit from the drop-down list.

  • Page 55: People Counting

    DS-K3G301(L)X Series Tripod Turnstile User Manual People Counting Set people counting. Steps 1. Click Configuration → Turnstile → People Counting to enter the page. Figure 8-10 People Counting 2. Enable People Counting. 3. Enable Device Offline People Counting, the device will count people numbers even if it is offline. 4.

  • Page 56: Other Settings

    DS-K3G301(L)X Series Tripod Turnstile User Manual 6. Select passing direction and view people counting results of entrance or exit. 7. Optional: Click Clear to clear all the people counting information. Other Settings Set other parameters. Steps 1. Click Configuration → Turnstile Configuration → Other Settings to enter the page. 2.

  • Page 57: Set Privacy Parameters

    DS-K3G301(L)X Series Tripod Turnstile User Manual Sector M1 card encryption can improve the security level of authentication. Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available.

  • Page 58: Upgrade And Maintenance

    DS-K3G301(L)X Series Tripod Turnstile User Manual 3. Set the appellation. 4. Set the time period when authentication succeeded. 1) Click Add Time Duration. 2) Set the time duration. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content.

  • Page 59: Restore Parameters

    DS-K3G301(L)X Series Tripod Turnstile User Manual Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC. Click Upgrade to start upgrading. Note Do not power off during the upgrading. Restore Parameters Click Maintenance and Security → Maintenance → Backup and Reset . Restore All All parameters will be restored to the factory settings.

  • Page 60: Component Status

    DS-K3G301(L)X Series Tripod Turnstile User Manual Debug Command Management Select the command type, select quick command or enter custom command, and select the board type. Click Send to send the command. View the received information in the execution result box. Click End Debugging, the device returns to normal operating state.
  • Page 61 DS-K3G301(L)X Series Tripod Turnstile User Manual Note The function is only supported by certain device models. Create and Import Self-signed Certificate Steps 1. Go to Maintenance and Security → Security → Certificate Management . 2. In the Certificate Files area, select a Certificate Type from the drop-down list. 3.
  • Page 62 DS-K3G301(L)X Series Tripod Turnstile User Manual Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Import.

  • Page 63: Chapter 9 Configure The Device Via The Mobile Browser

    DS-K3G301(L)X Series Tripod Turnstile User Manual Chapter 9 Configure the Device via the Mobile Browser 9.1 Login You can login via mobile browser. Note Make sure the device is activated. ● Make sure the device and the phone are on the same network segment. ●...
  • Page 64 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-1 Status and Remote Control You can view the device status. If there is exception, you can tap to view the component details. You can remotely control barrier by tap the icons.
  • Page 65 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-2 Shortcut Entry and Basic Information You can tap to fast enter the basic settings page, user page, keyfob page and network page. You can view model, serial No. and firmware version, and you can tap to fast enter the basic information page.

  • Page 66: Configuration

    DS-K3G301(L)X Series Tripod Turnstile User Manual 9.3 Configuration 9.3.1 Turnstile Basic Parameters You can set the basic parameters of the turnstile. Tap Basic Settings of the shortcut entry on the overview page. Set the regular passing mode for the entrance and exit. Tap Save.
  • Page 67 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-3 Add Person 2. Add person. 1) Tap+. 2) Set the following parameters. Employee ID Enter the employee ID. The Employee ID cannot be 0 or exceed 32 characters. It can be a combination of uppercase, lowercase letters and numbers.

  • Page 68: Keyfob Settings

    DS-K3G301(L)X Series Tripod Turnstile User Manual User Role Select your user role. Card Add card. Tap +. Enter the Card No., and select the Card Type. Tap Save to add the card. 3) Tap Save. 3. Tap the user that needs to be edited in the user list to edit the information. 4.

  • Page 69: View Device Basic Information

    DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-4 Keyfob Settings Set Working Mode as One-to-One or One-to-Many. Tap Management to enter the page. Tap + to add keyfob. Set keyfob name, serial No. and remain open permission. 9.3.4 View Device Basic Information You can view the device name, language, model, serial No., version, and Mac address, etc.

  • Page 70: Time Settings

    DS-K3G301(L)X Series Tripod Turnstile User Manual You can view the device language, model, serial No., version, local RS-485 number, number of alarm input, number of alarm output, Mac address and factory information, etc. Tap Device Capacity to view the quantity and capacity of person, card and event. Tap Save.

  • Page 71: User Management

    DS-K3G301(L)X Series Tripod Turnstile User Manual Time Zone Select the time zone where the device is located from the drop-down list. Time Sync. Mode Manual By default, the device time should be synchronized manually. You can set the device time manually.
  • Page 72 DS-K3G301(L)X Series Tripod Turnstile User Manual Route Advertisement The IPv6 address is generated by combining the route advertisement and the device Mac address. Note Route advertisement mode requires the support from the router that the device is connected to. Manual Enter IPv6 Address, IPv6 Subnet Mask, and IPv6 Default Gateway.
  • Page 73 DS-K3G301(L)X Series Tripod Turnstile User Manual 3. You can enable Custom to enter the server address. Note 6 to 12 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use ● a combination of no less than 8 letters or numbers.

  • Page 74: Event Search

    DS-K3G301(L)X Series Tripod Turnstile User Manual 4. Tap Save. 5. Refresh the page or reboot the device, and you can view the Register Status. Tap Test to test the register status. 9.3.8 Event Search → Event Search . Figure 9-7 Event Search Select event types, major type and sub type.

  • Page 75: Set Audio

    DS-K3G301(L)X Series Tripod Turnstile User Manual The search results will be displayed in the list. 9.3.9 Set Audio Set the device volume. Steps 1. Tap → Audio to enter the settings page. 2. You can adjust the device output volume according to your actual needs. 3.
  • Page 76 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-8 Authentication Settings 2. Tap Save after configuration. Terminal Choose Entrance or Exit for settings. Terminal Type/Model You can view the current terminal type and model. Enable Authentication Device The terminal can be used for card swiping normally when the function is enabled.
  • Page 77 DS-K3G301(L)X Series Tripod Turnstile User Manual Authentication Select an authentication mode according to your actual needs from the drop-down list. Authentication Interval You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed.

  • Page 78: Terminal Settings

    DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-9 Door Parameters Select entrance or exit for configuration, configure Name and Open Duration, and select Exit Button Type. Configure Door Remain Open Duration with First Person. The mode is applicable for the passing of groups of persons, such as visitors entering the scenic spots.
  • Page 79 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-10 Terminal Parameters Permission Free Mode The device will not verify the person's permission, but only the person's validity period. If the person is in the validity period, the barrier will open. You can enable Verify Credential Locally. After enabling the function, the device will only verify the person's permission without the schedule template, etc.
  • Page 80 DS-K3G301(L)X Series Tripod Turnstile User Manual Figure 9-11 Card Security Configure card parameters, and click Save. Enable NFC Card In order to prevent the mobile phone from getting the data of the access control, you can disable NFC card to increase the security level of the data. Enable M1 Card Enable M1 card and authenticating by presenting M1 card is available.

  • Page 81: Upgrade And Maintenance

    DS-K3G301(L)X Series Tripod Turnstile User Manual Enable the function and set the encryption sector. Note It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available. Note If the peripheral card reader supports presenting EM card, the function is also supported to enable/disable the EM card function Enable DESFire Card The device can read the data from DESFire card when enabling the DESFire card function.

  • Page 82: View Open Source Software License

    DS-K3G301(L)X Series Tripod Turnstile User Manual Restore to Factory Settings All parameters will be restored to the factory settings. You should activate the device before usage. Log Export → Log Export . Select the log type, and tap Export to download the maintenance log. 9.3.12 View Open Source Software License →...

  • Page 83: Chapter 10 Other Platforms To Configure

    You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For details, see the platforms' user manual. iVMS-4200 Client Software Click/tap the link to view the client software's user manual. http://enpinfodata.hikvision.com/analysisQR/showQR/ca930247 HikCentral Access Control (HCAC) Click/tap the link to view the HCAC's user manual. http://enpinfodata.hikvision.com/analysisQR/showQR/f2f6cf42...

  • Page 84: Appendix A. Legal Information

    ● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.

  • Page 85: Data Protection

    LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...

  • Page 86: Appendix B. Dip Switch

    DS-K3G301(L)X Series Tripod Turnstile User Manual Appendix B. DIP Switch B.1 DIP Switch Description The DIP switch is on the access control board. No.1 and No 2 is from the low bit to the high bit. Figure B-1 DIP Switch When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off.

  • Page 87: Appendix C. Button Configuration Description

    DS-K3G301(L)X Series Tripod Turnstile User Manual Appendix C. Button Configuration Description Refer to the table below for device configuration via button on the main lane control board. Level-1 Configuration No. Description Level-1 Configuration No. and Functions keyfob Pairing Mode 1-Normal Mode 2-Pairing Mode Note By default, 1 will be displayed...
  • Page 88 DS-K3G301(L)X Series Tripod Turnstile User Manual Level-1 Configuration No. Description Level-1 Configuration No. and Functions Note By default, 5 will be displayed on the display screen. Exit Duration 5-5s，6-6s，7-7s, ..., 60-60s Note By default, 5 will be displayed on the display screen. Brightness of Light 0-0，1-1，2-2, …...

  • Page 89: Appendix D. Event And Alarm Type

    DS-K3G301(L)X Series Tripod Turnstile User Manual Appendix D. Event and Alarm Type Event Alarm Type Force Accessing None Climb over Arm Visual and Audible Passing Timeout None Arm Obstructed None...

  • Page 90: Appendix E. Table Of Audio Index Related Content

    DS-K3G301(L)X Series Tripod Turnstile User Manual Appendix E. Table of Audio Index Related Content Index Content Authenticated. Card No. does not exist. Climbing over the barrier. Passing timeout. Force accessing. No permissions. Authentication time out. Authentication failed. Expired card.

  • Page 91: Appendix F. Error Code Description

    DS-K3G301(L)X Series Tripod Turnstile User Manual Appendix F. Error Code Description The tripod turnstile will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason Code Error Reason Code...
  • Page 92 UD36894B-A...

This manual is also suitable for:

Ds-k3g301lx series

Table of Contents