Table of contents 1. Safety information 2. Layout and items supplied 3. Intended use 4. Technical data 5. Before starting the equipment 6. Operation 7. Cleaning, maintenance and ordering spare parts 8. Faults 9. Disposal and recycling 10. Storage - 5 -...
Page 6
Danger! - Read the operating instructions to reduce the risk of injury Keep all other persons away from the danger zone. Protect the tool from the damp and never expose it to rain. Important! The cutter blades continue to run after the motor is switched off . Wait for the blades to come to a standstill.
• DANGER! Do not overreach - keep proper footing and When using the equipment, a number of safety balance at all times. • precautions must be observed to avoid injuries Stay alert. Use common sense. Do not and damage. Please read the complete operating operate appliance when you are tired or instructions and safety information with due care.
Page 8
Do not use battery-operated appliances in may present a risk of fire or chemical burn the rain. Always remove or disconnect battery if mishandled. Replace battery with Einhell/ pack before adjusting, cleaning, servicing or lawn master brand only. Use of another transporting the lawn trimmer.
2. Layout and items supplied appliance before making any adjustments, changing accessories, or storing appliance. Such preventive safety measures reduce the 2.1 Layout (Fig. 1) risk of starting the appliance accidentally. 1. Grass cutter blade • Under abusive conditions, liquid may be 2.
3. Intended use 6. Operation The equipment is designed for cutting the edges The area to be cut must fi rst be cleared of stones of lawns and small areas of grass in private and and other solid objects. The safety lock-off (Fig.1/ hobby gardens.
7. Cleaning, maintenance and Make sure that there are no foreign bodies in or alongside the hedge, which could damage the ordering spare parts blades. HAZARD! To prevent injuries, slip the blade guard over Always take the battery out of the equipment the blade.
Einhell USA dealer subject to the express consent of iSC GmbH. or call the Einhell USA customer service center. Only identical replacement parts Subject to technical changes should be utilized for repairs. This will ensure that the safety of the power tool is maintained.
Page 13
Power-X-Change Fast Charger Original operating instructions Fast Charger Art.-Nr.: 4512080 I.-Nr.: 11018...
Replacing the power cable DANGER! When using the equipment, a number of safety If the power cable for this precautions must be observed to avoid injuries equipment is damaged, it and damage. Please read the complete operating instructions and safety information with due care. must be replaced by the Keep these operating instructions in a safe place so that the information is available at all times.
4. In section 8 „Charger indicator“ you will fi nd a 1. If your power tool requires service, con- table with an explanation of the LED indicator tact an authorized Einhell USA dealer or on the charger. call the Einhell USA customer service center.
• 6. Disposal and recycling Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. The equipment is supplied in packaging to • Consult the dealer or an experienced radio/ prevent it from being damaged in transit. The TV technician for help.
8. Charger indicator Indicator status Explanations and actions Red LED Green LED Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger Off Charging The charger is charging the battery pack in quick charge mode. The charging times are shown directly on the charger.
Need help?
Do you have a question about the GE-CG 18 Li and is the answer not in the manual?
Questions and answers