Disposal And Recycling - EINHELL GE-FS 18/53 Li Original Operating Instructions

8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
Spare prongs Art. No. 34.052.31
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
9. Storage
•
Clean and maintain the equipment before put-
ting it into storage
•
Store the equipment and accessories in a
dark and dry place at above freezing tempe-
rature. The ideal storage temperature is bet-
ween 5 and 30 °C. Store the electric tool in its
original packaging.
9.1 Wall bracket (Fig. 17)
You can use the wall bracket (Fig. 2 / Item 20) for
storage purposes.
Caution! Check that there are no electric cables
or other installations (such as water pipes) near
where you want to drill the holes. Make sure that
the wall bracket is fi tted securely and horizontally.
Use only suitable fasteners on a wall capable of
bearing the load.
1. Mark the positions for the two horizontal drill
holes on a wall capable of bearing the load.
The drill holes must be 90 mm apart.
2. Then drill two holes in the wall and insert
suitable wall plugs. Place the holes in the wall
bracket over the drill holes and secure the wall
bracket using suitable screws.
3. Push the base tube (Item 10) into the wall bra-
cket (Item 20).
Anl_GE_FS_18_53_Li_SPK13.indb 25 Anl_GE_FS_18_53_Li_SPK13.indb 25
GB
10. Transport
Secure the equipment during transportation in
order to prevent damage or injuries.

11. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should be
taken to a suitable collection center for proper dis-
posal. If you do not know the whereabouts of such
a collection point, you should ask in your local
council offi ces.
- 25 -
12.04.2023 12:59:31 12.04.2023 12:59:31