Table of Contents
Advertisement
16. Install straps through D-rings. Pull straps tight and
fasten with hook and loop fastener.
17. Assemble four mounting brackets
q
assembly
. Use two screws
w
plate
to attach each mounting bracket.
DO NOT torque fasteners at this time.
e
to tent
r
and one weld nut
Instr 9941299
Rev 01 2023-05
q
18. Set tent assembly
Use at least two people to help set tent assembly on
vehicle. Tent assembly weighs 146 lb (66 kg). Take
care to avoid pinching of hands or fingers when
setting tent on roof rack.
Tent can be set up to extend over driver's side or
passenger side of vehicle. Make sure ladder
brackets are oriented toward side away from desired
extension side.
Position tent as desired between slots for rail studs.
Tent mounting brackets must not overlap openings in
rack slots.
19. Install one rail stud
of platform rack.
Page 8 of 19
on top of platform rack.
WARNING
NOTICE
NOTICE
t
through slot at each corner
Advertisement
Table of Contents
