Operation - Polaris 2890560 Manual

15. Attach and tighten straps.

OPERATION

LED LIGHT STRIP
2)
LED strip power cord
locations. The first location is 12 V socket in center
console of vehicle.
Obtaining power from this location will require the
vehicle ignition switch to be in ON position.
The second location is at front power point near grille
of vehicle. Plug adapter into power point.
can be plugged in at two
Instr 9941299
Do not carry any additional cargo on top of tent
Then plug power cord
Use of this location to obtain power does not require
ignition switch to be ON.
Excessive use of LED light strip may lead to battery
Switch for LED strip is part of LED light strip power
2)
cord . Tapping or pressing the red oval on switch
controls LED light strip.
• Tap red oval briefly to turn light on.
• Tap red oval briefly to turn light off. Light will turn off
after a short delay.
• Hold finger on red oval to dim or brighten LED light.
Rev 01 2023-05 Page 18 of 19
WARNING
assembly.
2)
into adapter.
NOTICE
discharge.