Polaris 2890560 Manual page 12

Rooftop tent kit
Table of Contents

Advertisement

36. Collapse top rungs of ladder until ladder is
approximately vertical.
Make sure that when ladder is positioned, base of
tent is level with top of roof rack. Make sure that legs
of ladder are on secure ground and cannot slide or
move. Failure to support ladder properly may result
in falling or tent damage.
37. Roll up cover and use two straps under tent to hold
cover.
After tent is deployed, do not drive or move vehicle.
If loop strap cannot be found, lift tent hinge. Strap
can become trapped in hinge.
WARNING
WARNING
NOTICE
Instr 9941299
38. Remove tent rods
39. Remove toggles from corners of rain fly.
40. Install tent rods
through slot in skirt at base of tent.
Rev 01 2023-05
Page 12 of 19
j
from bag.
j
. Pass straight end of tent rod

Advertisement

Table of Contents
loading

Table of Contents