Download Print this page

Polaris 2880326 Assembly Instructions

Trailerable cover kit

Download this manual

TRAILERABLE COVER KIT

P/N 2880326

APPLICATION

RZR 4 900

BEFORE YOU BEGIN

Read these instructions twice and check to be sure all parts and tools are accounted for. Please retain these

installation instructions for future reference and parts ordering information.

KIT CONTENTS

Ref

TOOLS NEEDED

Safety Goggles

APPROXIMATE ASSEMBLY TIME

5 mins

IMPORTANT

Your Polaris TRAILERABLE COVER KIT is exclusively designed for your vehicle. Please read the installation

instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For

your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence

shown.

Qty

Part Description

Trailerable Cover

P/N 9925260 Rev 01 05/14 Page 1 of 3

Instructions

Part Number

2880326

9925260

Page 1 5 mins IMPORTANT Your Polaris TRAILERABLE COVER KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris. For your safety, and to ensure a satisfactory installation, perform all installation steps correctly in the sequence shown.
Page 2 INSTALLATION INSTRUCTIONS 1. Place the vehicle in “PARK” and turn the key to “OFF” position. Remove the key from the vehicle. 2. If a spare tire is in place, remove the tire and the tie down clamp before using the cover to trailer. 3.
Page 3 7. Pull cover down as far as possible down over all four tires as shown in figure. NOTE: The shown figure is for two passenger vehicle. This figure is for reference only. 8. Ratchet webbing tight. Guide webbing into spool. Apply about 10-15 ft. lbs. (13.5-20 Nm) of pressure on the handle.