Table of Contents
Advertisement
25. Unfold travel cover
travel cover.
A
26. Install zipper half
q
assembly
. Groove will be found on side farthest
from ladder mounting brackets.
Zipper should face down toward ground.
27. Connect travel cover
zipper closed along entire length of side.
28. Allow travel cover to hang over side of vehicle.
h
. Remove zipper half
into groove on side of tent
NOTICE
h
A
to zipper half
. Pull
Instr 9941299
A
from
29. Open ladder strap.
Before opening tent assembly, make sure that
surrounding area is clear of power lines, branches,
or other obstacles that may come into contact with
30. Release side straps on tent assembly.
31. Extend ladder
ladder will lock in place with an audible click.
Rev 01 2023-05
Page 10 of 19
WARNING
tent.
i
to full length. Each section of
Advertisement
Table of Contents
