Tools Required; Consumables Required; Accessory Installation - Polaris 2890560 Manual

REF QTY PART DESCRIPTION
21 1 Battery to 12 V Socket Adapter
22 1 Bungee Cords
23 1 Open End Wrench 10 mm
24 1 Double Ended Open End Wrench 8/10 mm

TOOLS REQUIRED

• Safety Glasses
• Crowfoot Wrench (17 mm)
• Socket Set, Metric

CONSUMABLES REQUIRED

• Silicone Lubricant
INSTALLATION INSTRUCTIONS
VEHICLE PREPARATION
GENERAL
1. Park vehicle on a flat surface.
2. Shift vehicle into PARK.
3. Turn key to OFF position and remove key.
4. Chock at least one front and one rear tire with a
wheel chock on both front and rear side of each
tire.

ACCESSORY INSTALLATION

IMPORTANT
Installation is easier if the vehicle is clean and free of
FIRST TIME SETUP
1. Remove tent assembly
debris.
q
from packaging.
Instr 9941299
P/N AVAILABLE
SEPARATELY
n/a
n/a
n/a
n/a
• Socket Set, Torx
• Torque Wrench
• Wrench Set, Metric
2. Place tent, with frame side down, on an
appropriate work surface.
3. Pull up on four straps to detach hook and loop
fastener. Remove straps from D-rings.
4. Lift top half of tent assembly and open tent.
Rev 01 2023-05 Page 5 of 19
AVAILABLE
SERVICE KIT
n/a
n/a
n/a
n/a
® Bit