Table of Contents
Advertisement
Timer Function
GB
The timer enables you to switch the system on or off at specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time,
you must start again.
1
Switch the system on by pressing On/Standby (
2
Press Timer/Clock until
3
Press Program/Set.
Result:ON TIME is displayed for a few seconds, followed by any switch-
on time already set; you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by pressing Tuning
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing Tuning
d Press Program/Set.
Result: OFF TIME is displayed for a few seconds, followed by any
switch-off time already set; you can now set the timer switch-off
time.
5
Set the timer switch-off time.
a Set the hour by pressing Tuning
b Press Program/Set.
Result: The minutes flash.
c Set the minutes by pressing Tuning
d Press Program/Set.
Result: VOL 10 is displayed, where 10 corresponds to the volume already set.
6
Press Tuning
and
Program/Set.
Result:The source to be selected is displayed.
7
Press Tuning
and
system switches on.
If you select...
You must also...
TAPE (cassette) ;
Insert a recorded cassette in the deck.
TUNER (radio) ;
Select the FM or AM frequency band by pressing
•
Tuning
Press Program/Set.
•
Select a preset station by pressing
•
Tuning
CD (compact disc) ; Load compact disc.
Press Program/Set to confirm the timer.
8
Press On/Standby to set the system to standby mode.
Result:
is displayed to the middle right of the time, indicating that the timer has
been set. The system will switch on and off automatically at the required
times.
If the timer switch on and off times are identical, the word ERROR
is displayed.
18
).
TIMER is displayed.
and
.
and
.
and
.
and
.
to adjust the volume level and press
to select the source to be played when the
and
.
and
.
On/Standby
1,8
Power
EQ Preset
Sound
Sleep
CD Repeat Mono/ST.
4,5,6,7
CD
CD
Cancelling the Timer
After having set the timer, it will start automatically as shown by
the
indication on the display. If you no longer wish to use the
timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Cancel the timer
Restart the timer
On/Standby
Power
EQ Preset
Sound
Sleep
CD Repeat Mono/ST.
Timer
Timer/
On/Off
Clock
2
Program
/Set
AUX
3,4,5,6,7
TUNER
Band
TAPE
CD
VOL.
Tuning
Mode
CD
CD
4,5,6,7
VOL.
Press Timer On/Off
Once.
Result:
is no longer displayed.
Twice.
Timer
Timer/
On/Off
Clock
Program
/Set
AUX
TUNER
Result:
is displayed again.
Hide quick links:
Advertisement
Table of Contents
