Setting The Clock; Listening To A Compact Disc; Selecting A Track; Searching For A Specific Music Passage On A Cd - Samsung MM-B5 Instruction Manual

Cd-r/rw playback
Table of Contents

Advertisement

Setting the Clock

GB
Your system is equipped with a clock which allows you to
turn your system on and off automatically.
You should set the clock:
When you first purchase the micro-component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby (
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Program/Set.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the system is in
standby mode.
You can display the time, even when you are using another
function, by pressing Timer/Clock once.
On/Standby
Timer
Timer/
On/Off
Clock
2
1
Power
Program
EQ Preset
Sound
/Set
AUX
3,5,7
Sleep
CD Repeat Mono/ST.
TUNER
Band

Listening to a Compact Disc

Do not use CDs of irregular shapes like heart or octagon shapes.
The performance of the player may be degraded.
1
Press the CD(
)button on the main unit and select CD.
2
Open the CD door by pushing on the top of the main unit marked
Push Open (
).
Result: The CD door is opened.
3
Place the CD on the compartment so that the CD label faces upward.
4
Close the CD door.
Result: Number of tracks and the total playback time are shown on
the display.
5
Press the CD(
) button for playback.
6
Adjust the volume according to needs with the following procedures.
Press the VOL. + or – button.
10
) .
Press...
Press...
VOL.
Tuning
Mode
CD
CD
CD
CD
4,6
4,6
VOL.
7
If it is desired to pause while the playback is processing, press the
CD(
) button.
Press the CD(
) button once again to play back again.
8
To stop playback, press the Stop (
CD
TUNER
Band
1, 5, 7
RDS

Selecting a Track

You can select the track you wish to listen to, either when the
compact disc player is stopped or when a disc is playing.
To start playback at the beginning of the...
Next track
Current track
Previous track
Track of your choice
VOL.
Tuning
Mode
CD
CD
VOL.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a
specific music passage on a track.
To search through the tracks...
Forwards
Backwards
It is recommended that you turn the volume down before using
this function.
VOL.
Tuning
Mode
CD
CD
VOL.
) button.
6
VOL.
6
Down
Tuning Mode
Up
EQ
REC/Pause
CD Sync.
8
S.Bass
Repeat
REV Mode
Press...
once
once
twice
or
the
appropriate number of
times.
CD
CD
Press and hold down...
for at least one second
for at least one second
CD
CD

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents