Cleaning Your Mini-Compact System; Precautions When Using Compact Discs; Precautions When Using Audio Cassettes; Before Contacting The After-Sales Service - Samsung MAX-DS720 Instruction Manual

Cleaning Your Mini-Compact
System
To obtain the best possible results from your mini-compact
system, you must clean the following elements regularly:
The outer casing
The compact disc player
The cassette players (heads, rollers and drive capstans)
Always unplug the system from the wall outlet:
Before cleaning it
If you are not going to be using it for a long time
Outer Casing
Clean the outer casing regularly using a soft cloth and a light detergent. Do
not use abrasive powders, liquids or aerosol cleaners. Never let any liquids
get into the system.
Compact Disc Player
1
Before playing a compact disc, clean it with a special CD cleaning
agent. Do not use the same cleaning agents as for vinyl LP records.
Carefully wipe the disc from the centre outward.
2
Regularly clean the player with a special cleaning disc (available from
your local dealer).
Tape Decks
1
Press Push Eject( ) to open the cassette deck.
2
Use a cotton bud and a special cassette cleaning agent to clean the:
Head (1)
Rollers (2)
Drive capstans (3)
If you will not be using the remote control for a long time,
remove the batteries to prevent corrosion.
Although your system is very hard-wearing, it should not be
used in an excessively dusty environment or subjected to
shocks or extreme heat (close to heating appliances or in
direct sunlight, etc.).
If the unit emits an unpleasant odor when in use, unplug it
from the main supply and contact the after-sales service.
Precautions When Using Compact
Discs
Handle your compact discs with care. Always hold them by
the edges to avoid leaving fingerprints on the shiny surface.
When you have finished playing a compact disc, always put it
back in its case.
Do not fix paper or adhesive tape to the discs and do not write
on the label.
Clean them with a special-purpose cloth.
Store your compact discs in a clean place, out of direct sun-
light, where they will not be exposed to high temperatures.
Always use compact discs marked
3
1 2
COMPACT
.
DIGITAL AUDIO
Precautions When Using Audio
Cassettes
Check that the tape in the cassette is sufficiently taught.
To prevent erasing a cassette that you wish to keep, remove the safety
tab on the upper edge of the cassette. To record a cassette, where the
tab has been broken, simply cover the opening with adhesive tape.
When you have finished playing a cassette, always put it back in its case.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they place unnecessary strain
on the tape mechanism.
Before Contacting the After-Sales
Service
It always takes a little time to become familiar with a new appliance. If you
have any of the problems listed below, try the solutions given. They may
save you the time and inconvenience of an unnecessary service call.
Problem
The system does not work • The main lead is not correctly plugged into a
• The remote control batteries need replacing or
• The On/Standby button has not been pressed.
G
E
• The volume has been completely turned down.
N
• The correct function (TUNER, CD, TAPE,
E
There is no sound
R
• You have connected a set of earphones.
A
• The loudspeaker wires have been disconnected.
L
• The MUTE button has been pressed.
The Timer does not work • The timer has been stopped by pressing
System still doesn't work, even after fol- •
lowing steps above.
• The CD function has not been selected.
• The disc has been inserted face down or is
C
The compact disc player does not
• The laser sensor is dirty or dusty.
start playing
D • The system has not been installed on a flat,
• Condensation has formed in the player; leave
• The TAPE function has not been selected.
C
The tape does not start playing
• The cassette has not been inserted correctly.
A
S • The cassette player has not been closed.
S
• The tape is either slack or broken.
E
T
The volume falls off
• The audio heads are dirty.
T
• The rollers or drive capstans are dirty.
E
S
• The tape is worn.
The cassette is not erased correctly
• The TUNER function has not been selected.
There is excessive wow and flutter
• The radio frequency has not been correctly
R
A
Reception is poor or no radio sta-
• The aerial has been disconnected or is not fac-
D
tions are received at all
I
O
• You are in a building that blocks radio waves;
If the above guidelines do not allow you to solve the problem, take a note of:
The model and serial numbers, normally printed on the rear of the system
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG after-sales service.
Checks/Explanation
wall socket or the wall socket is not switched on.
the polarity has not been respected.
AUX) has not been selected.
TIMER ON/OFF.
Press the 3D SOUND button for 5 seconds
in power 'OFF'(standby), the system is
returned the original position (RESET)
either dirty or scratched.
horizontal surface.
the system in a warm, airy room for at least
one hour.
selected.
ing the right way. Turn it until you find the best
orientation.
you must use an outside aerial.
29
GB