Samsung MAX-DS720 Instruction Manual page 20

System Setup (Cont'd)
GB
TV SCREEN(TV SCREEN RATIO)
Select when you want to watch a 16:9 screen ratio DVD movie on a TV
with a 4:3 ratio screen.
LANGUAGES
TV SCREEN
RATING LEVEL
DIGITAL
: Move
4:3LB
You can see the full 16:9 picture, but black bars will
appear at the top and bottom of the screen.
4:3PS
You can only view the central portion of the 16:9 screen.
16:9
You can view in wide screen but the top and bottom of
the picture will be cut off.
However if the movie is recorded in 4:3 ratio, you cannot view the full
16:9 picture with the above functions.
RATING LEVEL
The Rating Level function works in conjunction with DVDs which have been
assigned a rating, to help control the type of DVD that your family watches.
1
LANGUAGES SYSTEM
TV SCREEN
4:3 LB
RATING LEVEL OFF
DIGITAL OUTPUT BITSTREAM
: Move Setup : Exit
2
LANGUAGES SYSTEM
TV SCREEN 4:3 LB
RATING LEVEL
DIGITAL OUTPUT BITSTREAM
: Move Setup : Exit
3
LANGUAGES SYSTEM
TV SCREEN 4:3 LB
RATING LEVEL
DIGITAL OUTPUT
: Move Setup : Exit
Press Return Button to return to the previous
level.
When the rating level password has been forgotten
While the player is in the stop mode, hold the Normal Dubbing button
down on the main unit for more than 5 seconds.
"INITIAL" appears on the display and all default settings will return
to Factory Preset.
20
SYSTEM
4:3 LB
OFF
OUTPUT BITSTREAM
Setup : Exit
Select RATING LEVEL, then press the Enter button.
Use the number(0~9) buttons to input a 4-
digit password.
The player's password is set to "7890" by default.
Use the Up/Down ( / ) button to select
either RATING LEVEL or NEW PASSWORD,
and then press the Enter button.
There are up to 8 rating levels on a disc.
If LEVEL 6 is selected, a disc which contains
rating LEVEL 7 and above cannot be played.
If you select NEW PASSWORD, the
screen changes and enables you to enter
the new password.
DIGITAL OUTPUT
BITSTREAM
LANGUAGES SYSTEM
TV SCREEN 4:3 LB
RATING LEVEL OFF
DIGITAL OUTPUT BITSTREAM
: Move Setup : Exit
LPCM
Select this if Dolby Digital 5.1 CH
connections have been made.
Sends a digital signal that
carries the Dolby Digital 5.1 or
DTS multichannel information
to your external decoder.
Select this otherwise.
Sends a linear PCM(Pulse
Code Modulation), or 2 channel
stereo signal, to your A/V
receiver.