Echo Power Pruner PPT-265ES Operator's Manual page 47

4. Align flexible drive shaft coupler with drive shaft socket and slide
together until handle shaft is fully seated into drive shaft.
5. Tighten clamping bolts (A).
/
handle shafT
1. Remove protective cap from drive shaft end.
2. Loosen two (2) clamping screws (A) and remove locating screw
(B).
3. Pull flexible drive shaft coupler 2-3 in. out of drive shaft assembly.
4. Align flexible drive shaft coupler with engine socket and slide
together until locating hole in shaft is visible through locating hole
in engine housing.
5. Install locating screw and tighten clamping bolts.
power head
P P
ower
o '
PeraTor s
TM
runer
11
M
anual
A
B
A