Download Print this page

Samsung VR5360C Owner's Manual: Using The Display Button; Recording; One Touch Recording(otr)

Samsung vr5360c: owners manual.
Hide thumbs

Advertisement

VCR Operation

Using the DISPLAY Button

The display function gives you information about the status of your VCR.
Location on screen
Display information
Upper left corner
The VCR functions (Play, Stop or Record).
Upper center
Audio Status (VR8360C only)
Upper right corner
Channel VCR is tuned to.
Center
Record file (The date, time, channel and station ID).
Lower left corner
Amount of time that has elapsed since
the counter was last reset.
Lower center corner Tape speed (SP and SLP).
Lower right
Tape remaining graphic.
Accessing the DISPLAY screen
1
Press the DISPLAY button while the cassette is playing or
recording. After approximately 3 seconds, the display
changes, then only the counter and graphic displays are
shown.
2
Press the DISPLAY button to switch the counter mode to
showing the time remaining on the tape.
Press the DISPLAY button again to remove display from
the TV screen.
Note: In order for display information to be accurate, set up the tape length in the VCR Function Setup first
(page 12).
Record file information
• The record file is displayed only when playing a tape recorded on this VCR.
• When a recorded tape is initially played in the VCR, the record file is displayed after 3 seconds.
• If the time and date aren't set, only the recorded channel number will be displayed.
• When the VCR mode changes, the display information will be delayed about 10 seconds.
• The station ID data is displayed only when available.
16

Recording

Recording while you watch
STOP
((MAIN))
06
Sep 27
2000
07 : 33 pm
CH 09
PBS
0:01:30 SP
Separate Recording and Viewing
You can view a different program from the one you're recording if your VCR is connected to your anten-
0:01:30
na or cable system. When using a cable decoder box, use an A/B switch.
While recording on one channel, press the TV/VCR button on the remote control to select TV viewing. The VCR
indicator light on the front display shuts off. Select the channel you want to watch with the TV's channel buttons.
One Touch Recording (OTR)
Rem 4:59
VCR Operation
1
Insert a video cassette with the record protect safety
tab intact. Check the tape speed. If the VCR indicator
on the front panel is not lit, press the TV/VCR button.
2
Select a channel to record by pressing CH/TRK
or the number buttons.
3
Press the REC button on the remote control or the
front of the VCR. The REC indicator will light.
4
If you want to edit out unwanted material during
recording, press the P/STILL button while recording
and the VCR will pause. To resume recording, press
the P/STILL button again.
5
To end recording, press the STOP button.
1
Insert a video tape, check the tape speed, and select
the channel you want to record, using the CH/TRK
or number buttons.
2
Press the REC button on the remote control or the
front of the VCR the number of times that corre-
sponds to length of record time you desire
(see chart below). The Record length time appears
on the screen.
3
The VCR will turn off automatically at the end of the
recording time. To stop an OTR recording in
progress, press the POWER button on the remote
control or on the front of the VCR
VCR
VCR
VCR
Record length 0:30
11
SP
RECORD
Display
Record time
Press once
Record
Not timed.
Press 2 times
R 0:30
30mins
Press 3 times
R 1:00
1 hour
Press 4 times
R 1:30
1 hour + 30 mins
Press 5 times
R 2:00
2 hours
Press 6 times
R 3:00
3 hours
Press 7 times
R 4:00
4 hours
Press 8 times
Record
Not timed
17

Advertisement

Troubleshooting

   Related Manuals for Samsung VR5360C

This manual also for:

Vr8360c

Comments to this Manuals

Symbols: 0
Latest comments: