Vcr Functions - Samsung VR5160 Owner's Manual

VCR Setup
Adding or Deleting Memorized Channels
You can add or delete channels that have been memorized with the Automatic Channel Memory function. The
Auto Channel Memory function must be performed before Channel Add/Delete can be used.
and ❿ button to select
Press the MENU button. Press
1
"CHANNEL SETUP."
and ❿ button to select "Channel Add/Delete."
Press
2
Press two number buttons or press CH/TRK
3
the channel you want to add or delete. For numbers
over 100, press the 100 button on the remote control
first.
For example : To add channel 7, press 0 then 7 or use CH/TRK
For example : To delete channel 121, press the 100 button,
then 2 and 1 or use .
To ADD the selected channel: Press ❿ button on the
4
remote control.
To DELETE the selected channel: Press ➛ button on
the remote control.
When you have finished, press the MENU button twice.
Note: • A deleted channel can be accessed with the number buttons, but the CH/TRK
• To add the LINE input to channel memory, select LINE using the LINE IN button on the remote control,
❿
then press button on the remote control.
12
MAIN MENU
Timer recording
Clock set/adjust
❿!Channel setup
VCR function setup
Language/Lengua/Langue
❷ % ❿ ]
[ / ] [MENU/EXIT
CHANNEL SETUP
Ant/Cable: [CABLE TV]
Auto channel memory
❿ Channel add/delete
[ ❷ % ! / ❿ ] [MENU/EXIT ]
for
CHANNEL ADD/DELETE
❿ Select channel:
[ 1]
❿
and press [ ] to ADD
press [ ➛ ] to DELETE
.
➛❿ ]
❷ % ! [ / ] [MENU/EXIT
CHANNEL ADD/DELETE
❿ Select channel: [121]
(in memory)
and press [ ❿ ] to ADD
➛
press [ ] to DELETE
❷ % [ / ➛❿ ] [MENU/EXIT ]
buttons skip past it.
VCR Setup

VCR Functions

To make all of the VCR's features available, set the VCR functions before playing or recording a tape.
Tape length
Press the MENU button on the remote control. Press
1
to select VCR Function Setup, then press ❿.
Press ❿ to select the video cassette length.
2
This information is usually printed on the tape box.
The menu cycles through: T120, T160 or T180.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the DISPLAY button (see page 17).
Press the MENU button when you are finished.
3
Auto play
Access the "VCR FUNCTION SETUP" menu as
described above. Press to set the cursor to "Auto
play", then press ❿ to set ON or OFF. When "Auto play"
is ON, the VCR will automatically begin playing a video
tape when it is inserted, as long as the safety tab of the
cassette has been removed (see page 18). Press the
MENU button on the remote control when you are
finished.
Auto repeat
Access the "VCR FUNCTION SETUP" menu.
and ❿ buttons to set "Auto repeat" ON or
Press the
OFF. In the VCR FUNCTION SETUP "Auto repeat" sets
the VCR to play a tape repeatedly [unless a tape control
is activated (stop, fast forward or rewind)] . Press the
MENU button on the remote control when you are
finished.
Auto power off
Access the "VCR FUNCTION SETUP" menu.
and ❿ to set "Auto power off" to 1Hr or 2Hr.
Press
"Auto power off " sets the VCR to turn off automatically.
Note: VCR will shut off 1 or 2 hours after the last button is pressed.
MAIN MENU
Timer recording
Clock set/adjust
Channel setup
❿VCR function setup
Language/Lengua/Langue
❿
❷ % [ / ] [MENU/EXIT ]
VCR FUNCTION SETUP
❿
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
❿ ]
[ ❷ % / ] [MENU/EXIT
VCR FUNCTION SETUP
Tape length: [T120]
❿
Auto play: [ON]
Auto repeat: [OFF]
Auto power off: [OFF]
❿ ]
[ ❷ % / ] [MENU/EXIT
VCR FUNCTION SETUP
Tape length: [T120]
Auto play: [ON]
❿
Auto repeat: [ON]
Auto power off: [OFF]
❿ ]
❷ % [ / ] [MENU/EXIT
VCR FUNCTION SETUP
Tape length: [T120]
Auto play: [ON]
Auto repeat: [OFF]
❿
Auto power off: [1Hr]
❿ ]
[ ❷ % / ] [MENU/EXIT
13