Using Menus And The Remote Control; Selecting The On-Screen Language; Setting The Clock - Samsung VR5160 Owner's Manual

VCR Setup

Using Menus and the Remote Control

Your VCR has on-screen menus that allow you to access and control the VCR's programmable features.
You will use the buttons on the remote control or on the front panel to work with the on-screen programming.
Each button works not only PLAY, STOP, F.F, REW but also as a shift cursor in the on screen menus.
: PLAY/Pause or cursor
: STOP or cursor : MENU ON or OFF
MENU
: REW or ➛ cursor : F.F or ❿ cursor
Press the MENU button on your remote control. The
1
Main Menu will appear on screen.
Select the item you want to adjust using the button
2
followed by the ❿ button on your remote control.
If you want to exit any on-screen menu, simply press the SEARCH/EXIT button on the remote control.
If the main menu does not appear, make sure the TV is tuned to the same channel as the CH3/4 switch on the
rear panel of the VCR, and check for the VCR indicator on the front display. If the VCR indicator does not light,
press the TV/VCR button on the remote control to turn it on.

Selecting the On-Screen Language

To select the language for the on-screen menu display,
1
press the MENU button on the remote control.
Press on the remote control to select "Language."
2
Press ❿ to select the language you want for the on
3
screen menus (English, Spanish, French).
8

Setting the Clock

The VCR has an internal clock which is used to turn the VCR on and off for timer recording.
Automatically Setting the Clock
When the AUTO CLOCK SET feature is selected, the VCR automatically updates its internal clock using
Coordinated Universal Time information transmitted by some broadcast stations. If the VCR is connected to a
cable box or DSS
the cable box is tuned to the PBS channel.
MENU
1
MAIN MENU
❿ Timer recording
Clock set/adjust
Channel setup
2
VCR function setup
Language/Lengua/Langue
❿ ]
[ ❷ % / ] [MENU/EXIT
3
MAIN MENU
❿ Timer recording
Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
❷ % [ / ❿ ] [MENU/EXIT ]
MAIN MENU
Spring : The clock changes forward one hour on the first Sunday in April.
Timer recording
Autumn : The clock changes back one hour on the last Sunday in October.
Clock set/adjust
Channel setup
VCR function setup
❿Language/Lengua/Langue
❷ % ❿ ]
[ / ] [MENU/EXIT
4
MENU PRINCIPAL
Programmation
Réglage de l'horloge
If AUTO CLOCK SET is unsuccessful, check local station listings for channels with Coordinated Universal Time.
Réglage des chaînes
Réglage des fonctions
Tune the VCR to one of these channels, and turn the VCR off. If the time does not set within 20 minutes, set the
❿Language/Lengua/Langue
time and date manually.
❷ % ❿ ]
[ / ] [MENU/EXIT
VCR Setup
® box, cable box or DSS ® box setup must be completed first (see page 6) and it's activated when
and ❿to
Press MENU on the remote control. Press
select "CLOCK SET/ADJUST."
Press ❿ to select AUTO.
Clock Data CH : If you select AUTO, the VCR will
automatically tune to a channel providing time data.
This may take the VCR up to 20 minutes. You can also
tune the VCR manually to a channel that you know
carries time information (PBS channel) with the ➛!❿
buttons.
Time ZONE : If you select AUTO for your time zone,
the VCR sets the clock using the first Coordinated
Universal Time information it finds. If the time is not
correct, select another time zone.
Daylight Savings Time : If you select AUTO, the VCR
sets the clock using the DST information broadcast in
the signal (channel). If you select YES, Daylight
Savings Time is observed:
Press MENU when you finish setting the clock.
If you selected AUTO CLOCK, the VCR clock will be
set automatically when the VCR is turned OFF.
MAIN MENU
Timer recording
❿ Clock set/adjust
Channel setup
VCR function setup
Language/Lengua/Langue
❷ % ❿ ]
[ / ] [MENU/EXIT
CLOCK SET/ADJUST
❿ AUTO
MANUAL
Select [ ] and press [ ❿ ]
❷ ! % !
[ ❷ % / ❿ ] [MENU/EXIT ]
CLOCK SET/ADJUST
❿ Clock data CH: [AUTO]
Time zone : [AUTO]
Do you observe [AUTO]
DST in summer?
❷ % ➛❿ ]
[ / ] [MENU/EXIT
9