Table of Contents
Advertisement
FM-4 Programming Module Reference Manual
Figure 51:
Faults Window
When online, the Active Faults window, Reset button and Power Up group window become active. There will also be three tabs that
appear, Fault Log, Fault Counts, and Drive Fault Log.
Figure 52:
Faults View Online - Faults Log Tab
Active Faults Group
The Active Faults group contains the Active Faults window.
Active Faults Window
This window displays any active faults in the system. Those faults which do not require a reboot can be cleared by clicking
on the Reset button. For more detailed fault information, refer to "Diagnostics and Troubleshooting" on page 237.
Power Up Group
These parameters will be active when online with the drive.
Power Up Count
This parameter shows the numbers of times the drive that the FM-4 is attached to has been powered up since the last reset be
the factory.
Power Up Time
This parameter shows the time, in hours, since the drive was last powered up.
Total Power Up
This parameter shows the total time that the drive has been powered up since reset by the factory.
62
Advertisement
Table of Contents
